Philips CSS5530B, User Manual

8

EN

Note

•

Surround sound depends on factors such as room 

shape and size, type of wall and ceiling, windows and 

reflective surfaces, and speaker acoustics. Experiment 

with the speaker positions to find the optimum setting 

for you.

Follow these general guidelines for speakers 

placement.

1 

Seating position:

This is the center of your listening area.

2 

Main unit 

(function as center speaker):

Place the main unit directly in front of the 

seating position, either above or below 

your TV.

3 

FRONT SPEAKER L

 (front left) and 

FRONT SPEAKER R

 (front right) speakers:

Place the left and right speakers in the 

front, and at equal distance from the main 

unit. Make sure that the left, right, and the 

main unit are at equal distance from your 

seating position. 

4 

REAR SPEAKER L

 (rear left) and 

REAR 

SPEAKER R

 (rear right) speakers: 

SUB

WOOFER

L

FRONT SPEAKER

R

FRONT SPEAKER

L

REAR SPEAKER

R

REAR SPEAKER

Wireless Box

Place the rear surround speakers to the 

left and right side of your seating position, 

either in line with it or slightly behind it. 

5 

SUBWOOFER

 (subwoofer):

Place the subwoofer at least one meter 

to the left or right of the TV. Leave about 

10-centimeter clearance from the wall.

6 

Wireless box (receiver)

:

Place the wireless box in between the rear 

speakers for easy cable connection.

Pair up with the rear 

speakers

Set up the rear speakers to work with the main 

unit wirelessly. The rear speakers automatically 

pair up with the main unit for wireless 

connection when you turn on the main unit, 

and the wireless box.

What you need

•  Connect the rear speakers to the supplied 

wireless box (make sure that the left and 

right speakers match the connectors on 

the wireless box).

•  Connect the wireless box to AC power to 

power on.

If no audio from the rear speakers can be heard, 

do the following for pairing.

1 

Press the 

PAIRING

 (PAIRING) button on 

the wireless box to enter the pairing mode.

»

The white LED on the wireless box 

blinks quickly.

2 

In OPTICAL mode (press 

OPTICAL

) , 

within six seconds, on the remote control, 

press   twice then 

 once, and 

then hold down 

BASS +

. 

»

If the pairing succeeds, the white LED 

on the wireless box lights up.

»

If the pairing fails, the white LED on 

the wireless box blinks slowly.

3 

If the pairing fails, repeat the steps above.