Philips D6350 Extended User Documentation Download

Page: 40 / 46

20 Frequently

asked questions

No signal bar is displayed on the screen.

•

The handset is out of range. Move it closer

to the base station.

•

If the handset displays

[Register your

Handset]

, put the handset on the base

until the signal bar appears.

Tip

•

For further information, see 'Register additional

handsets' on the Services section.

If I fail to pair (register) the additional

handsets to the base station, what do I do?

•

Your base memory is full. Unregister

the unused handsets and try again (see

'Unregister handsets' on page 34).

•

If registration fails, unplug the power

adapter from the base station and plug it

back. Wait for 15 seconds, and then repeat

the registration procedure.

The range is short. How can I improve it?

The range is subject to environmental factors,

like electrical devices or walls in between.

•

Move the base station to another corner/

room.

•

Move the base station away from other

electrical appliances nearby that could

interfere with the range (like routers, TV,

radio, etc.).

•

Do not put the base station on a metallic

desk or a metallic table top.

•

Turn off the ECO mode.

My handset is in searching or unavailable

status, what do I do?

• Make sure that the base station has power

supply.

• Move the handset closer to the base

station.

• Register the handset to the base station.

I have chosen a wrong country in Welcome

screen, what do I do?

Reset your phone settings to the original

factory settings (see 'Restore default settings'

on page 34).

I have chosen a wrong language which I cannot

read, what do I do?

Press to go back to the standby screen.

Press to access the main menu screen.

Press / to select , then you see one of the

following texts appear on the screen:

Telefooninst.

Taal

Phone setup

Language

Réglages

Langue

Telefon-Setup

Sprache

Config. telef.

Lingua

Select it to access the language options.

Select your own language.

The handset loses connection with the base

or the sound interrupts during a call.

•

The handset is nearly out of range. Move it

closer to the base station.

•

Check if the

ECO

mode is activated. Turn it

off to increase the handset range and enjoy

the optimal call conditions.

•

Re-register the handset to the base station.

No dialing tone/no free line.

•

Check your phone connections.

•

The handset is out of range. Move it closer

to the base station.

•

The handset is in

[searching]

[Unavailable]

status. Register the handset

to the base station..

No docking tone.

•

The handset is not placed properly on the

base station/charger.

•

The charging contacts are dirty. Disconnect

the power supply first and clean the

contacts with a damp cloth.

I cannot change the settings of my voice mail,

what do I do?

The voice mail service is managed by your

service provider but not the phone itself.

Summary of Contents for D6350















































Search results

Summary of Contents for D6350

Reviews:

Related manuals for D6350

Brands by name

Popular brands

Philips D6350, Extended User Documentation

Search results

Summary of Contents for D6350

Reviews:

Related manuals for D6350

Brands by name

Popular brands