background image

English

21

Clock/Timer

4

Press 

TUNING

 

4 ¢

 (or 

4 ¢

on

the remote control) to set the hours.

5

Press 

TIMER/SLEEP 

again.

The clock digits for the minutes flash.

6

Press 

TUNING

 

4 ¢

 (or 

4 ¢

on

the remote control) to set the minutes.

7

Press 

TIMER/SLEEP 

to confirm the time.

The timer is now set and activated.

Notes: .
– If CD source is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
– If iPod source is selected and no iPod player is
docked, TUNER will be selected automatically.

Activating and deactivating
TIMER

In standby mode, press briefly 

TIMER/SLEEP

once.

Display shows   if activated, and disappears if

deactivated.

Activating and deactivating
SLEEP

The sleep timer enables the system to switch off
by itself after a set period of
time.

During playback, press 

TIMER/

SLEEP 

on the remote control

once or more.

Display shows 

 and one

of the sleep time options in
sequence: 

60

45

30

,

15

00

60

...  if you have

selected a time.

To deactivate, during playback press 

TIMER/

SLEEP 

on the remote control once or more

until “ 

00

“ is shown, or press 

STANDBY ON

2

on the system (or 

2

 on the remote control).

 disappears from the display.

Setting the clock

1

In standby mode, press and hold 

CLOCK/

DISPLAY 

on the remote control set

 

for 2

seconds.

2

Press 

PROG

 to select 12-hour or 24-hour

display.

3

Press 

CLOCK/DISPLAY

 to confirm.

The clock digits for the hours flash.

4

Press 

TUNING

 

4 ¢

 (or 

4 ¢

on

the remote control) to set the hours.

5

Press 

CLOCK/DISPLAY

 again.

The clock digits for the minutes flash.

6

Press 

TUNING

 

4 ¢

 (or 

4 ¢

on

the remote control) to set the minutes.

7

Press 

CLOCK/DISPLAY 

to confirm the time.

Setting the timer

The system can be used as an alarm clock,
whereby the CD, iPod FM or DAB is switched on
at a set time. The clock time needs to be set first
before the timer can be used.

1

In standby mode, press and hold 

TIMER/

SLEEP 

about 2 seconds on the remote control.

2

Press 

SOURCE 

(or 

DISC/iPod/TUNER/

DAB

 on the remote control) to select sound

source.

3

Press 

TIMER/SLEEP

 to confirm your desired

mode.

The clock digits for the hours flash.

 

DCB146_05_Eng

7/1/08, 12:02

21

Summary of Contents for DCB146/05


























Reviews: