15
English
EN
6 Listen to FM
radio
Tune to FM radio stations
1
Press
FM
to select FM tuner mode.
2
Press and hold
or
for 3 seconds.
»
The system tunes to an FM station
with strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a station with weak signal:
Press or
repeatedly until you find good
reception.
Program FM radio stations
automatically
Note
•
You can program a maximum of 20 preset FM radio
stations.
In FM tuner mode, press and hold
MODE
/
SCAN
for 3 seconds.
»
The system stores all the FM radio stations
automatically, and then broadcasts the first
preset radio station.
Program FM radio stations
manually
1
In tuner mode, tune to an FM radio station.
2
Press
PROG
to activate programming
mode.
»
[PROG]
(program) blinks.
3
Press or
repeatedly to select a
channel number.
4
Press
PROG
again to confirm.
5
Repeat steps 1-4 to store other FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press
or
to select a preset
radio station.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information.
1
Tune to an RDS station.
2
Press
RDS
repeatedly to scroll through the
following information (if available):
»
Program service
»
Program type such as
[NEWS]
(news),
[SPORT]
(sport),
[POP M]
(pop
music)...
»
Radio text message
»
Time
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
change to monaural sound.
DCB2077_10_UM_01_V1.1.indb 15
12/21/2012 2:18:55 PM
