12
7
Press
PROG
/
CLOCK SET
to confirm.
The minute digits are displayed and
»
begin to blink.
8
Press /
to set the minute.
9
Press
PROG
/
CLOCK SET
to confirm the
clock setting.
Turn on
1
Press .
The unit switches to the last selected
»
source.
Switch to standby
1
Press again to switch the unit to
standby mode.
The clock (if set) appears on the
»
display panel.
To switch the unit to Eco Power Standby
mode:
1
Press and hold for more than 2
seconds.
The backlight on the display panel
»
turns off.
Tip
The unit switches to Eco Power Standby mode
•
after 15 minutes in standby mode.
To switch between standby mode and Eco
Standby Mode:
1
Press and hold for more than 2
seconds.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
[
»
AUTO INSTALL PRESS - PLAY
KEY
](auto install press - play key) is
displayed.
2
Press on the main unit to start
installation.
The unit automatically stores radio
»
stations with sufficient signal strength.
When all the available radio stations
»
are stored, the first preset radio station
is broadcast automatically.
Set clock
Note
You can set the clock in the standby mode
•
only.
1
Press and hold
PROG
/
CLOCK SET
to
enter the clock setting mode.
»
[SET CLOCK]
(set clock) scrolls on
the screen.
»
[Synch On]
(synch on) is displayed.
2
Press /
to select
[Y]
or
[N]
.
•
[Y]
: the unit reads the DAB/RDS
time and sets the clock automatically.
•
[N]:
the unit turns off the time
synchronization.
3
Press
PROG
/
CLOCK SET
to confirm.
4
Press /
repeatedly to select 12 hour
or 24 hour format.
5
Press
PROG
/
CLOCK SET
to confirm.
The hour digits are displayed and begin
»
to blink.
6
Press /
to set the hour.
EN