11
Find the correct video input
channel
1
Turn on the player.
2
Press
DISC
to select the disc source.
Turn on the TV and switch to the
•
correct video-in channel.
Note
See the user manual of your TV for how to
•
switch between video-in channels.
Select the correct TV system
This player is compatible with both NTSC
and PAL. If the picture is abnormally displayed
with the default setting, select a TV system that
matches your TV. (Refer to “Setup” > “System
setup” >
[TV SYSTEM]
for details)
Select a language for on-screen
display
English, traditional Chinese, Korean, and Thai
are the default language options for this setting.
(See “Setup” > “Language setup” >
[OSD
LANGUAGE]
for details)
5 Get
started
Turn on
1
Press .
The player switches to the last selected
»
source.
Note
If no source is played within 15 minutes, the
•
player switches to standby mode.
If no operation is performed within 15 minutes
•
in standby mode, the player switches to Eco-
power standby mode.
Press
•
to switch the player to standby mode.
Set the clock
The player uses the 24-hour time format.
1
In standby mode, press and hold
DISPLAY/CLOCK
for 2 seconds.
The hour digits blink.
»
2
Press / to set the hour.
3
Press
DISPLAY/CLOCK
again.
The minute digits blink.
»
4
Press / to set the minute.
5
Press
DISPLAY/CLOCK
to confirm the
setup.
English
EN
