18
Note
If the iPod source is selected but no iPod is
•
connected, the system will switch to the tuner
source automatically.
Activate and deactivate alarm timer
1
In the standby mode, press
SLEEP/TIMER
repeatedly to activate or deactivate timer.
If timer is activated, the display shows
»
.
If timer is deactivated,
»
disappears on
the display.
Note
Alarm timer is not available in MP3 LINK
•
mode.
If the DISC source is selected and the
•
track cannot be played, tuner is activated
automatically.
Listen to an audio player
You can listen to an MP3 player through this
unit.
1
Press
MP3 LINK
to select MP3 LINK
source.
2
Connect the supplied MP3 link cable to:
•
MP3 LINK
jack (3.5 mm) on the unit
the headphone jack on an external
•
device
3
Start to play the device (see the device
user manual).
10 Other features
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press
SLEEP/
TIMER
repeatedly to select a set period
of time (in minutes).
When sleep timer is activated, the
»
display shows .
To deactivate sleep timer
1
Press
SLEEP/TIMER
repeatedly until
[OFF]
is displayed.
When sleep timer is deactivated,
»
disappears on the display.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER or iPod source is activated to
play at a preset time.
1
Ensure that you have set the clock
correctly.
2
In the standby mode, press and hold
SLEEP/TIMER
.
3
Press
DISC
,
TUN
or
iPod
to select a
source.
4
Press
SLEEP/TIMER
to confirm.
The hour digits are displayed and begin
»
to blink.
5
Press /
to set the hour.
6
Press
SLEEP/TIMER
to confirm.
The minute digits are displayed and
»
begin to blink.
7
Press /
to set the minute.
8
Press
SLEEP/TIMER
to confirm.
The timer is set and activated.
»
EN
