12
EN
6 Cleaning
Note
•
Always turn the appliance off and
unplug the appliance from the
electrical outlet before cleaning.
•
Never immerse the appliance in
water or any other liquid.
•
Never use abrasive or aggressive
cleaning agents such as bleach
or alcohol to clean any part of the
appliance.
•
Only the pre-filter is washable. The
air purification filter is not washable.
•
Do not attempt to clean the filter or
air quality sensor with a vacuum.
Cleaning the body of the
dehumidifier
Regularly clean the inside and outside
of the dehumidifier to prevent dust from
collecting.
1
Use a soft, dry cloth to clean both
the interior and exterior of the
appliance.
2
The air outlet can also be cleaned
with a dry, soft cloth.
3
Remove the water tank from the
dehumidifier (fig.
v
).
4
Insert the Philips provided hose into
the drainage hole (fig.
{
).
5
Push the protective cover of
drainage outlet rightwards to open
it (fig.
|
).
6
Connect the hose to the drainage
outlet (fig.
}
).
7
Put the water tank back into the
dehumidifier (fig.
y
).
Note
•
Put the water tank back in to
the dehumidifier even using
the continuous drainage, or the
dehumidifier can not operate
normally.
•
Make sure the hose fits tightly
so that no water leaks from the
dehumidifier.
•
When using the continuous
drainage, make sure the hose is laid
flat and not knotted.
•
Make sure the hose is not immersed
in water, nor raised higher than the
continuous drainage hole.
•
Place the outlet of the hose in
somewhere it can easily drain.
•
Check the dehumidifier once a week
when draining water continuously
or left unattended for an extended
period of time.
