13
EN
English
5
Allow the pre-filter to air dry
thoroughly before placing back in
the dehumidifier.
Note
•
To optimize the lifetime of the
pre-filter, make sure it dries
completely after cleaning.
•
Wash your hands after handling the
filter.
6
Put the pre-filter back into the
appliance (fig.
‚
).
7
Reattach the rear panel by pressing
the bottom part of the rear panel
onto the appliance first (1). Then,
gently push the panel against the
body of the appliance (2) (fig.
g
).
8
Put the plug of the dehumidifier in
the wall outlet.
9
Touch and hold the timer button
for 3 seconds to reset the pre-filter.
10
Wash your hands thoroughly after
cleaning the filter.
Cleaning the water tank
Clean the water tank every day to keep
it clean.
1
Switch off the dehumidifier and
unplug from the electrical outlet.
2
Remove the water tank from the
dehumidifier (fig.
v
).
3
Fill the water tank for 1/3 with water
(fig.
~
).
4
Add some mild washing-up liquid
to the water in the water tank.
5
Wash the water tank under a
running tap water, and clean the
insides of it with a soft clean cloth
(fig.
).
6
Wipe the outside of the water tank
dry with a clean cloth (fig.
x
).
7
Put the water tank back into the
dehumidifier (fig.
y
).
Cleaning the pre-filter
Clean the pre-filter when
F0
and are
displayed on the screen.
Note
•
The pre-filter is washable and
vacuum cleanable.
1
Switch off the dehumidifier and
unplug from the electrical outlet.
2
Hold the dehumidifier and pull the
top part of the rear cover towards
you (fig.
c
).
3
Detach the pre-filter from the
appliance (fig.
€
).
4
If the pre-filter is very dirty, use a
soft brush to brush away the dust.
Wash the pre-filter under a running
tap water (fig.
).
