Conformity, Environment and Safety
12
http://www.philips.com/faqs/dect
Safety information
This equipment is not designed to make emergency calls when the power fails.An alternative
has to be made available to allow emergency calls.
Conformity
Hereby, Philips declares that the DECT 613xx and DECT 617xx are in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.This product can
only be connected to the analogue telephone network of the UK and Ireland.
Power requirements
This product requires an electrical supply of 220-240 volts, alternating monophased power,
excluding IT installations defined in standard EN 60-950. In case of power failure, the
communication can be lost.
Warning !
The electrical network is classified as hazardous according to criteria in the standard EN 60-
950.The only way to power down this product is to unplug the power supply from the
electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always
easily accessible.
Telephone connection
The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as
defined in the standard EN 60-950.
Safety precautions
Do not allow the handset to come into contact with water. Do not open the handset or the
base station.You could be exposed to high voltages. Do not allow the charging contacts or the
battery to come into contact with conductive materials.
Handsfree activation could suddenly increase the volume in the earpiece to a very high level.
Make sure the handset is not too close to your ear.
Environmental care
Please remember to observe the local regulations regarding the disposal of your packaging
materials, exhausted batteries and old phone and where possible promote their recycling.
Conformity,Environment and Safety
DECT613_GBIE_part1_07_09_04.qxd 07/09/2004 16:37 Page 10