Philips DPM 9450, User Manual

DPM 9450 - User Manual 

12

Voice-activated recording 

The DPM supports the voice-activated recording mode. 

This is the menu entry for voice-activated recording; a check mark next to the symbol indicates that voice-
activated recording is enabled. The symbol always shows the current setting: 

Confirm the menu entry selection by pressing the Jog Dial and do the following: 

• 

Enable voice-activated recording: 

• 

Disable voice-activated recording; this is the default setting: 

Confirm the setting by pressing the Jog Dial and to return to the DPM main menu. 

For more information on the voice-activated recording mode, refer to the 

Voice-activated recording

 section in 

this manual. 

Backlight on/off 

The DPM provides a backlit display for improved visibility. 

This is the menu entry for the display backlight; a check mark next to the symbol indicates that the backlit display 
function is enabled. The symbol always shows the current setting: 

Confirm the menu entry selection by pressing the Jog Dial and do the following: 

• 

Enable the backlight; this is the default setting. When you press a button on the DPM, the DPM display will be 

backlit for about eight seconds: 

• 

Disable the backlight; this setting guarantees a longer lifetime for the DPM's batteries: 

Confirm the setting by pressing the Jog Dial and to return to the DPM main menu. 

Changing the contrast 

You can change the contrast setting for the DPM display. 

This is the menu entry for the contrast setting: 

Confirm the menu entry selection by pressing the Jog Dial. 

The DPM provides seven contrast levels, from low contrast 

 to high contrast 

. The default 

setting is level 5: 

. 

Confirm your preferred contrast setting by pressing the Jog Dial; this also returns you to the DPM main menu. 

Displaying the recording time 

The DPM enables you to have an additional time displayed for the recording time. Depending on the setting which 
has been made in 

SpeechExec Dictate

 you will either see the used-up recording time or the remaining recording 

time. This time display also depends on the setting for the recording format (SP/LPm). 

Note:

 The recording time is only displayed if you have set the 

Advanced display

 option for the DPM appearance 

in 

SpeechExec Dictate

. 

• 

This is the menu entry for the remaining recording time setting; the check mark next to the symbol indicates 

that this additional time is currently displayed on the DPM: 

• 

This is the menu entry for the used-up recording time setting; the check mark next to the symbol indicates that 

this additional time is currently displayed on the DPM: 

To disable the display of this additional time, confirm the menu entry selection by pressing the Jog Dial. Move the 
Jog Dial to have the symbol without the check mark and confirm your changes by pressing the Jog Dial again. 
You will return to the DPM main menu.