background image

DPM 9450 - User Manual 

 

15

Recording - DPM 9450/52 

DPM 9450/52 enables you to create high-quality digital recordings. To make a recording with DPM 9450/52, do 
the following: 

1.  Move the 4-Position Switch to the REC (Record) position and start dictating. 

Speak clearly and keep a distance of approximately 4 inches (ten centimeters) between your mouth and the 
DPM. 

 

While DPM 9450/52 is in Recording mode, the Record LED shines permanently red (if Overwrite mode). 

Note:

 Depending on the setting for the recording mode, the LED can be either red or green. In Overwrite 

mode the LED is red; Overwrite is the default setting for the recording mode. In Insert mode, the LED is green. 

Note:

 In Recording mode, the following buttons are not available: EOL/P, INS/OVR, DEL, REC 

2.  Move the 4-Position Switch to the STOP (Stop) position to stop recording. 

 

The Record LED goes out. 

3.  To continue recording, move the 4-Position Switch to the REC (Record) position again. 

4.  When you are finished and do not want to make any further changes to the dictation, press the 

EOL/P button (

) to mark the current dictation as finished (EOL symbol:  ). 

The file is closed and a new, empty file is automatically generated. The file number is increased by one. 

Finishing a dictation (EOL and Priority) 

The EOL/P button (

) on the DPM has two functions: marking a dictation as finished (EOL function, End-of-

Letter) and assigning priority to a dictation. The EOL/P button is only operational if the 4-Position Switch is in the 
Stop position and recording has been done in the file.  

The dictation is marked as finished (EOL, End-of-Letter). 

The dictation has been assigned priority. 

Note:

 Finishing a dictation via the EOL/P button is also possible in Record Standby mode. 

The functions of the EOL/P button are as follows:  

• 

If you press the EOL/P button once, the current file is marked as finished (EOL, End-of-Letter). The file is 
closed and a new, empty file is created. 

 

 

• 

If you press the EOL/P button twice within 0.5 seconds, the current file is marked as finished (EOL) and 
priority is assigned to it. This also closes the current file and creates a new, empty file. 

 

 

Note:

 If you have finished a dictation with EOL, no further recording is possible in this file. It is also not 

possible to delete the file or to delete a section from the file. 

Summary of Contents for DPM 9450












































Reviews: