Try out
your mask
Based on your clinician’s recommendation, you have been provided with a
DreamWear under the nose nasal mask. Please do not throw anything away
until you have gone through your setup with a clinician.
Fit
your mask
With the mask assembled, place
the cushion under the nose.
Peel the headgear tabs away
from the fabric. Adjust the
length of the straps.
Position the frame on the top of
the head. Pull the headgear over
the back of the head.
Headgear
Cushion
Quick release
elbow
Connect
the remaining end of the CPAP
tubing to the quick-release elbow at the
top of the mask.
Press
the therapy on/off button on the device to
start the airflow. You should feel the gentle flow
of air in your mask.
Adjust
the headgear and tubing position for
comfort. Assume
different sleeping positions.
Move around until comfortable. If there are
any excessive air leaks, make final adjustments
while lying down.
2
3
4
1
The cushion opening will be
directly under the nostrils. The
cushion will hug the nose and
leaks will be minimal.
Note: Refer to your mask instructions for contraindications, warnings, safety checks and additional information.
Frame
DreamWear allows you to sleep how
you want –
stomach, side or back
