36
6
When prompted for a password, enter “0000”.
Double beep tone confi rmation is heard and the
»
LED turns on
stably if connection is successful.
If the pairing cannot be completed within one minute,
»
LED turns
off.
Tip
If your Bluetooth device is already paired with DS8550 before, you just need to fi nd
•
out the “PHILIPS DS8550” on your Bluetooth menu, then confi rm the connection.
To disconnect Bluetooth
1
Turn off the connected device or move it beyond the communication
range.
»
LED turns off.
Play audio fi les from bluetooth devices
Note
Make sure the Bluetooth connection between the unit and the device is active.
•
To start play, press
•
on the remote control.
To pause/resume play, press
•
again.
To track up/down, press forward/backward keys.
•
Play from an external device
You can also listen to an external audio device through this unit.
1
Press to select Aux-in mode.
2
Connect the supplied Aux-in link cable to:
the
•
AUX IN
jack (3.5mm) on the back of the unit.
the headphone jack on an external device.
•
3
Start to play the device (see the device user manual).
Adjust volume level
1
During play, press
VOL +/-
to increase/decrease the volume level.
Mute sound
1
During play, press
MUTE
to mute/unmute sound.
6
When prompted for a password, enter “0000”.
Double beep tone confi rmation is heard and the
»
LED turns on
stably if connection is successful.
If the pairing cannot be completed within one minute,
»
LED turns
off.
Tip
If your Bluetooth device is already paired with DS8550 before, you just need to fi nd
•
out the “PHILIPS DS8550” on your Bluetooth menu, then confi rm the connection.
To disconnect Bluetooth
1
Turn off the connected device or move it beyond the communication
range.
»
LED turns off.
Play audio fi les from bluetooth devices
Note
Make sure the Bluetooth connection between the unit and the device is active.
•
To start play, press
•
on the remote control.
To pause/resume play, press
•
again.
To track up/down, press forward/backward keys.
•
Play from an external device
You can also listen to an external audio device through this unit.
1
Press to select Aux-in mode.
2
Connect the supplied Aux-in link cable to:
the
•
AUX IN
jack (3.5mm) on the back of the unit.
the headphone jack on an external device.
•
3
Start to play the device (see the device user manual).
Adjust volume level
1
During play, press
VOL +/-
to increase/decrease the volume level.
Mute sound
1
During play, press
MUTE
to mute/unmute sound.
DFU_DS8550_EN_CS3_A5.indd 36
12.8.23 4:00:23 PM
