37
5 Product information
Note
Product information is subject to change without prior notice.
•
Specifi cations
Amplifi er
Rated Output Power
2X15 W RMS
Signal to Noise Ratio
85 dB
Aux-in Link
0.6 V RMS 10 kohm
General information
AC power (power adaptor)
OH-1065A1803500U
Input: 100-240V, 50/60Hz, 1.5A;
Output: 18V 3.5A;
Operation Power Consumption
<40W
ECO Standby Power Consumption
<1W
Dimensions
- Main Unit (W x H x D)
169 x 420 x 108mm
Weight
- Main Unit
2.22 kg
Bluetooth
Output power
0 dBm (Class 2)
Frequency band
2.4000 GHz - 2.4835 GHz ISM Band
Range
3 meters(free space)
Standard
Bluetooth 2.0 specifi cation
6 Troubleshooting
Warning
Never remove the casing of this apparatus.
•
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following
points before requesting service. If the problem remains unsolved, go to
the Philips web site (www.philips.com/welcome). When you contact Philips,
ensure that the apparatus is nearby and the model number and serial number
are available.
No power
Ensure that the AC power plug of the unit is connected properly.
•
Ensure that there is power at the AC outlet.
•
No sound
Adjust the volume.
•
No response from the unit
Disconnect and reconnect the AC power plug, then turn on the unit
•
again.
About Bluetooth device
Music playback is unavailable on the system even after successful Bluetooth
connection.
The device cannot be used with the system to play music.
•
The audio quality is poor after connection with a Bluetooth-enabled
device.
The Bluetooth reception is poor. Move the device closer to the
•
system or remove any obstacle between the device and the system.
Cannot connect with the system.
The device does not support the profi les required for the system.
•
The Bluetooth function of the device is not enabled. Refer to the
•
user manual of the device for how to enable the function.
5 Product information
Note
Product information is subject to change without prior notice.
•
Specifi cations
Amplifi er
Rated Output Power
2X15 W RMS
Signal to Noise Ratio
85 dB
Aux-in Link
0.6 V RMS 10 kohm
General information
AC power (power adaptor)
OH-1065A1803500U
Input: 100-240V, 50/60Hz, 1.5A;
Output: 18V 3.5A;
Operation Power Consumption
<40W
ECO Standby Power Consumption
<1W
Dimensions
- Main Unit (W x H x D)
169 x 420 x 108mm
Weight
- Main Unit
2.22 kg
Bluetooth
Output power
0 dBm (Class 2)
Frequency band
2.4000 GHz - 2.4835 GHz ISM Band
Range
3 meters(free space)
Standard
Bluetooth 2.0 specifi cation
6 Troubleshooting
Warning
Never remove the casing of this apparatus.
•
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following
points before requesting service. If the problem remains unsolved, go to
the Philips web site (www.philips.com/welcome). When you contact Philips,
ensure that the apparatus is nearby and the model number and serial number
are available.
No power
Ensure that the AC power plug of the unit is connected properly.
•
Ensure that there is power at the AC outlet.
•
No sound
Adjust the volume.
•
No response from the unit
Disconnect and reconnect the AC power plug, then turn on the unit
•
again.
About Bluetooth device
Music playback is unavailable on the system even after successful Bluetooth
connection.
The device cannot be used with the system to play music.
•
The audio quality is poor after connection with a Bluetooth-enabled
device.
The Bluetooth reception is poor. Move the device closer to the
•
system or remove any obstacle between the device and the system.
Cannot connect with the system.
The device does not support the profi les required for the system.
•
The Bluetooth function of the device is not enabled. Refer to the
•
user manual of the device for how to enable the function.
DFU_DS8550_EN_CS3_A5.indd 37
12.8.23 4:00:23 PM
