3.2 REMOTE CONTROL FUNCTIONS
Switching on from standby mode is done using the red key or using the number keys
0 ... 9
.
The unit software contains a functional description for the remote control. To consult this, simply
press the
RC
key on the remote control and then the keys for which you require assistance -
the appropriate help instructions appear on the screen.
Exit the help menu by pressing the
RC
key again.
The keys located around the
OK
key
+*
and
89
operate the functions Volume -/+ (VOL -
/+) and Channel -/+ (CH -/+) in standard mode.
3.3 SELECTING THE MENU LANGUAGE
The menu language can be switched between German, English, French, Italian, Spanish, Dutch
and Turkish.
Press the
M
,
4
and
2
keys to display respectively the main menu, installation menu and language
selection menu. Press the
OK
key and the choice of language is made as usual using the
9
and
8
keys.
The language originally set remains selected when you quit the menu using the
E
key.
The selected language is stored when you quit the menu using the
OK
key.
3.4 CHANNEL SELECTION
3.4.1 Channel selection using the number keys
0
...
9
,
8
,
9
and list
The channel is set by directly entering the channel number via the number keys (N.B. 0 is also a
channel number).
Move back/forward between the next/previous channel using the
8
/
9
keys.
A sequential list of channel numbers appears after pressing the
OK
key twice. The desired
channel can be selected using the
+
/
*
and
8
/
9
keys and can then be set using the
OK
key. Pressing the
OK
key again or pressing the
E
key quits the list.
3.4.2 Last channel using the
E
key
Pressing the
E
key switches between the two last set channels.
3.4.3 Zapper function using the
OK
and
+89*
keys
When the currently selected channel takes an advertising break, many users zap between one,
two or more alternative channels. It is easy to forget which was the original channel being
viewed.
The zapper function notes three other alternative channels starting from the selected channel.
However, note that only those channels that have been viewed for at least 5 seconds are stored
in the memory.
The last 4 channels stored in this way can be accessed directly using the
OK
key followed by
the
+89*
keys.
3.4.4 Channel management using channel pool and 10 favourite
lists
Digital television technology brings viewers a wide range of new channels. A satellite receiver
designed to receive the Astra 19° and Hotbird 13° satellites for example enables you to receive
well in excess of 1,200 TV and 600 radio channels. While more than half of these channels are
encrypted and can only be decoded with appropriate CA modules, this still leaves a substantial
number of channels to manage. In addition, the channels of six other satellites are pre-
programmed in the unit.
&
Summary of Contents for DSR 2015
Page 1: ......
