In the case of the radio channels up to 20 PCM-coded audio tracks may be
available, which you can select using the
8
or
9
keys and confirm with the
OK
key.
"AC-3 - general":
If you have selected the "Dolby digital/AC-3" operating mode for digital audio,
the digital output is automatically switched from PCM to AC-3 as soon as
corresponding coding is transmitted (see also item (6) Digital audio under
4.4.3 Signal paths).
3.7 ADJUSTING THE SOUND
a)
The volume of the receiver can be adjusted in 20 stages using the
+
or
*
keys.
The current volume level is indicated in the channel indicator.
b)
Switching the sound
/
on/off (mute) - when the sound is switched off, the OSD
displays a message for approx. 2 seconds. The «mute» function is cancelled by pressing
the volume keys
+
or
*
again.
3.8 TIMER
The timer programming menu is accessed by pressing the
/
key. Up to 8 timer events can be
input for TV or radio channels, as required.
N.B.:
Please note that with the selection "VCR record = Standard", the video recorder
must also be set to identical recording times (see also under 4.4.3 Signal paths
(5) VCR record).
N.B.:
Please note that the remote control is not active during timer recording to prevent
accidental recording of OSD messages. The volume is switched to full level during
recording.
If the remote control is activated, the channel indicator on the unit displays «r E c»
to indicate that a timer recording is currently active.
The timer recording can be interrupted prematurely only via the
/
key. After
interrupting the recording, the display indicates «End». The unit then reverts to
normal operation.
If a timer recording is started from standby mode, the unit reverts to standby mode
after the recording has finished.
1...8
Select the next free input field using the number keys
1
...
8
or using the
9
or
8
keys.
*+
Select consecutively the input fields for {Date} {Start} {Stop} and {Channel} (the input
field is highlighted in white).
OK
Activate the input for the selected field using the
OK
key (the input field is highlighted in
black).
Input the appropriate event either directly via the number keys
0
...
9
or by scrolling
through the options using the
* +
keys.
OK
Confirm your selection using the
OK
key and select the next input field.
E
After inputting {Date} {Start} {Stop} and {Channel}, you can exit the timer menu by
pressing
E
and quit or input further timed events. You can also programme the timer for
radio programmes in the Programme section using the
R
key.
If the data for timer programming are transmitted, they can also be transferred directly to
the timer via the menu ‘EPG... preview’ using the
/
key.
E n d
r E c
L 2 0
Summary of Contents for DSR 2015
Page 1: ......
