$
4.1.2 Changing the favourite name
Call up the list using the
OK
key.
Select the input field {NAME} using the keys
0...9
or
98
and activate by pressing
OK
.
You can select letters (upper or lower case) or numbers using the
9
or
8
key.
You can shift the input position right or left using the
*
or
+
key.
After inputting the desired name, the input field is deactivated again by pressing the
OK
key.
4.1.3 Channel pool (for advanced users)
The channel pool contains all channels in alphabetical order. Selection depending on satellite is
done using the
M
key; free or encrypted channels are chosen by pressing the
TV
key. All free
(or all encrypted) channels on the selected satellite are contained in the «All Free» section, also
the new free or encrypted channels after performing satellite search mode.
98
Select channels in rows.
+*
Select channels in columns.
All selected channels are set immediately by the receiver and indicated in the background. In the
case of scrambled channels the relevant CA module must be provided. The screen transparency
can be changed using the
F
key and (within 2 seconds) the
+
or
*
key.
M
Selection of satellite using the
M
key.
TV
Selection of free or encrypted channels using the
TV
key.
/
After pressing the
MUTE
key, individual channels can be deleted - e.g. channels that
are no longer on the air.
R
The channel pool activated using the
M
and
TV
keys can be managed here, i.e. all
«unused» channels or also all indicated channels can be deleted.
(Cf. MANAGING under point 4.5.2)
i
Show
antenna signal
and
reception parameters
.
If necessary, you can align your parabolic antenna using the sub-menu «Antenna signal». Turn
the antenna to the optimum position in the scales indicating field strength and signal reception
quality.
If the signal is very weak, the field strength scale may also fall to 0 - in which case you should
optimise the signal using the reception quality scale.
If the message «No signal» appears and only the field strength signal is indicated, the antenna
may be aligned with a satellite for analogue signals (which cannot be received by this receiver).
Summary of Contents for DSR 2015
Page 1: ......
