Philips DSS1005/01, Manual

16

5    Use more of your universal

remote and docking cradle
for iPod™

To access the advanced features of your 
universal remote and dock for iPod™, you must 
use the Set-up menu.

To open the Set-up menu, press and hold the 

MODE

 and 

IPOD™ LAUNCH

 keys simultaneously 

for 3 seconds.

To exit the Set-up menu and go directly to your 
iPod™ menu, press the 

IPOD™ LAUNCH

 key 

again.

To switch to your last selected device, press the 

MODE

 key.

5.1

Adding a device

To be able to operate your devices with your 
universal remote for iPod™, you first have to
add these devices to the remote control. You can 
add up to 6 devices from the list of devices 
below. Examples of available devices include ( but 
are not limited to):

s$6$
s#ABLE
s$333ATELLITE 
s4UNER
s#$
s46

Please check the Remote menu for the complete 
listing of device labels that can be added.

You cannot add a device twice. Once you have 
added a device to your Universal remote for 
iPod™, it disappears from the list. However, the 
list of devices includes ‘TV-2’ or ‘VCR-2’  for use 
when you want to program a second TV or
second VCR.

To add a device:
1.   

Select the option “Add a Device” in the
Set-up menu by using the cursor keys
Press 

OK

.

D

Note

If you have already added 6 devices on the 
remote, besides your iPod™ docking cradle, you 
will be asked to delete a device.

2.  

 Select the device and brand you want to
add. Press 

OK

. The remote will search for

available codes for the brand.

3.  

 Follow the on-screen instructions to test
the codes. When a working code set is
found, your device is correctly installed
When the device is correctly installed, the
following screen appears:

If no working code set is found:

s9OUCANPERFORMAFULLDATABASESEARCHTO

   find a correct code set. This means that 
   the remote will send out all codes available 
   in the database until a working code is 
   found.  This can take up to 25 minutes.

s9OUCANLEARNCODESFROMTHEORIGINAL

  remote device.

When you want to add another device, select 
“Yes”. Press 

OK

 and repeat steps 2 and 3.

When you have added all your devices, select 
“No”. Press 

OK

 to return to the Set-up menu.

Use more of your universal remote and docking cradle for iPod