18
EN
8 Other features
Set the sleep timer
This docking system can switch to standby
automatically after a set period of time.
1
When the unit is turned on, press
SLEEP/
TIMER
repeatedly to select a set period of
time (in minutes).
»
When sleep timer is activated, is
displayed.
To deactivate sleep timer
1
Press
SLEEP/TIMER
repeatedly until
[
SLEEP OFF
] (sleep off) is displayed.
»
When sleep timer is deactivated,
disappears.
Set the alarm timer
This docking system can be used as an alarm
clock. You can select CD, FM TUNER, iPod/
iPhone/iPad, or USB as alarm source.
Note
•
Ensure that you have set the clock correctly.
1
In standby mode, press and hold
SLEEP/
TIMER
until [
SET TIMER
](set timer) scrolls
on the display.
2
Press
CD
,
USB
,
DOCK
, or
TUNER
to
select a source.
3
Press
SLEEP/TIMER
to confirm.
»
The hour digits are displayed and begin
to blink.
4
Press / to set the hour, and then
press
SLEEP/TIMER
again.
»
The minute digits are displayed and
begin to blink.
5
Press / to set the minute.
6
Press
SLEEP/TIMER
to confirm.
»
The alarm timer is set and activated.
Note
•
To exit the alarm timer setting without storing, press
MENU
/ .
Activate and deactivate the alarm
timer
In standby mode, press
SLEEP/TIMER
repeatedly to activate or deactivate the alarm
timer.
»
If the alarm timer is activated, is
displayed
»
If the alarm timer is deactivated,
disappears.
Note
•
If CD/USB/DOCK source is selected, but no disc is
placed or no USB/iPod/iPhone/iPad is connected, the
FM TUNER is selected automatically.
Listen to an external device
You can also listen to an external audio device
through this docking system.
1
Press
MP3 LINK
to select audio in source.
2
Connect the supplied MP3 link cable to:
•
the
MP3 LINK
jack on the back of the
unit
•
the headphone jack on the device
3
Start to play the device. (See the device
user manual).
Summary of Contents for DTM5096
Page 2: ......
