………………………………………………....…………………………………………………………
…………………………………………………....…………………………………………………………
DTP170-NA Installation Instructions Rev B.Oct 10 2010
Specifications subject to change without notice. All rights reserved.
Dynalite, DyNet and associated logos are the registered trademarks of Philips Dynalite. Not to be reproduced without permission.
Manufactured by WMGD Pty Ltd (ABN 33 097 246 921) Unit 6, 691 Gardeners Road, Mascot, NSW 2020, Australia
Web: lightolier.com E-Mail: controls.support@philips.com. Tel: 1-800-526-2731
Installation Steps
…………………………………………………....…………………………………………………………
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference;
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
……………………………………………....…………………………………………………………
DyNet DC Load
Audio
max. 350mA@24VDC
On-board speakers
Screen
Line out via stereo jack
TFT LCD 7 inch diagonal
Microphone
Viewing Angle:
H 65˚, Vtop 60,˚ Vbottom 50˚
Data Ports
Resolution: 800 x 480 (16:9 screen ratio)
Color Depth: 16bit (65535)
Contrast: 300:1 Luminance: 280 cd/m2
Backlight:
LED >50,000 hr subject to screen
saver settings and usage patterns
Power-up indicator / reset push button:
Illuminated shortly on power-up. Press and hold for 5
seconds to reset the device.
RS485 DyNet
RJ45 10/100BASE-T Ethernet
Mini USB Type B socket
USB Type A socket (keyboard/mouse)
Hardware
CPU:
Intel XScale PXA310, 624MHz
Non Volatile Memory: FLASH, 512MB
Volatile Memory: SDRAM, 128MB
Touch overlay:
4 wire resistive
Compliance
RoHS, FCC, ICES Compliant (see statements)
User Page Objects
Operating Environment
Button
32º to 113ºF (0 -45° C) ambient temp
Fader
0% to 90% RH non condensing
Text box
Construction
Icon
Concealed fixings fascia, metal body and wall box
Image import
Dimensions
Operating System & Software
H 6.5” x W 8.7” x D 0.1” (exposed)
Windows CE 6.0
H5.9” x W 7.7”x D2.3” (hidden, including wall box)
Internet Explorer 6
Packed weight
Windows Media Player 9/MP3 support
DTP170-NA simulated glass fascia 3.8 lb
DTP170-NA
stainless steel fascia 4.2 lb
Accessories
Wall box MK part number is 260-748-01 : 8.6 x 12.6 inches. (supplied)
Mounting Dimensions
Mounting location
This device must be
mounted
indoors away from direct sunlight. The optimum viewing angle is 75°. Ensure that the LCD
display will be at or slightly below eye level for all users. Take this into account when deciding the mounting location.
Fixing the Device
It is recommended to use wall box for dry lining / plasterboard applications. See Accessories in
Product Specifications.
The display
The DTP170-NA LCD display and touch membrane are sensitive to damage from sharp or hard objects. Never operate the panel
using anything other than your fingertip. Ensure there are no protrusions when fitting the panel to the wall. If cleaning is required, use a dry
cloth or soft cloth with alcohol, neutral detergent or ethanol for clearing of dirt and smudging.
Power supply
The DTP170 Touchscreen is powered from the DyNet network and does not require mains voltage supply. Ensure enough
supply capacity is available from the network. For longer cable runs check voltage drop to ensure minimum 18VDC is provided across DTP170-
NA supply terminals when operating. For more information refer DyNet Cable Guidelines.
Special programming
This device will only operate in basic modes until programmed. If programming is required, contact your local agent
for details. Once the data cable is connected to the device, the factory default settings will allow the panel to control all channels in all dimmers.
A reset button on the front panel allows an electronic reset.
inches
This Class A digital apparatus complies with
Canadian ICES-003
Product Specifications
…………………………………………………....…………………………………………………………
…………………………………………………....…………………………………………………………
