Hookups (cont’d) 13
Connecting to a TV and a two-channel Stereo
(Stereo has Dolby Pro Logic or right/left Audio In jacks)
1
Connect the supplied yellow video cable to the Player’s
yellow VIDEO jack and to the corresponding VIDEO IN jack
on your TV
.
2
Connect the supplied red and white audio cables to the
Player’s R (right, red) and L (left, white) jacks and to the
right/left AUDIO IN jacks on the Stereo.
Match the cable
colors to the jack colors.
3
Connect the supplied power cord to the MAINS ~
(AC Power) jack on the Player.
Connect the AC plug to a power outlet.
4
Press
y
y
on the Player or its remote to turn on the Player.
Turn on the TV and set it to the correct Video In channel.
Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1 or EXT2, etc.These
channels often are near channel zero (0).
See your TV owner’s
manual for details. Or, change channels at the TV until you see the
Player’s blue background screen on the TV.
Turn on the Stereo and set it to the correct Audio In
channel or sound source.
Refer to the Stereo’s manual.
5
Set TV OUTPUT accordingly.
Details are on page 31.
• You may use S-Video or
Component Video connections
instead for higher picture
quality.These options must be
available on your TV. Details are
on pages 10-11.
Helpful Hint
DIGITAL
AUDIO OUTPUT
COAXIAL
VIDEO
S-VIDEO
Pr/Cr
Pb/Cb
Y
L
R
MAINS
LEFT AUDIO IN
RIGHT AUDIO IN
Stereo
(example only)
1
3
2
Back of TV
(example only)
VIDEO IN
VIDEO IN
DVD590M_17x 6/11/2003 1:42 PM Page 13