DVP3005/37_3
English
13
Connections
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1
Select one of the video connections
(CVBS VIDEO IN, COMPONENT VIDEO
IN) depending on the options available on
your TV.
2
Use the audio cables (white/red) to
connect
AUDIO OUT (L/R)
jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied)
.
Optional: Connecting to an
Audio System
Optional: Connecting Digital AV
Receiver
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1
Select one of the video connections
(CVBS VIDEO IN, COMPONENT VIDEO
IN) depending on the options available on
your TV.
2
Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver
(cable not
supplied)
.
3
Set the DVD Player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver
(see page 26
“Digital Output”).
Helpful Hint:
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
AUDIO
IN
STEREO
DIGITAL
AUDIO
IN
DIGITAL
AV Receiver
01-37 DVP3500_US3
14/07/05, 9:54 AM
13