15
[CD Upsampling]
For better sound quality in stereo mode, convert
the music CD to a higher sampling rate.
•
[Off]
- Turn off CD-upsampling.
•
[88.2kHz]
- Convert to twice the original
sampling rate.
•
[176.4kHz]
- Convert to four times the original
sampling rate.
[Night Mode]
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
•
[On]
- Enjoy quiet viewing at night.
•
[Off]
- Enjoy surround sound with a full
dynamic range.
Note
Applicable only to Dolby Digital encoded DVDs.
•
Video setup
1
Press
SETUP
.
»
[General Setup]
menu is displayed.
2
Press
to select
[Video Setup]
, and then
press to enter the submenu.
3
Select an option, and then press
OK
.
4
Select a setting, and then press
OK
.
To return to the previous menu, press
•
BACK
.
To exit the menu, press
•
SETUP
.
[TV System]
Change this setting if the video does not appear
correctly. By default, this setting matches the most
common setting for TVs in your country.
•
[PAL]
- For a PAL-system TV.
•
[Multi]
- For TV that is compatible with both
PAL and NTSC.
•
[NTSC]
- For an NTSC-system TV.
[TV Display]
Select a display format:
•
[Digital Output]
- Select a type of digital
output.
•
[All]
- Support multi-channel audio
formats.
•
[Off]
- Disable digital output.
•
[PCM Only]
- Downmix to two-channel
audio format.
•
[LPCM Output]
- Select the LPCM (Linear
Pulse Code Modulation) output sampling rate.
•
[48kHZ]
- For discs recorded at sampling
rate of 48 kHz.
•
[96kHZ]
- For discs recorded at sampling
rate of 96 kHz.
Note
•
[LPCM Output]
setting is only available if the
[Digital
Output]
is set to
[PCM Only]
.
The higher the sampling rate, the better the sound quality.
•
[HDMI Audio]
Select the HDMI audio setting when you connect
this product and the TV with an HDMI cable.
•
[On]
- Allow audio output through the TV and
the speaker system. If the audio format on the
disc is not supported, it will be downmixed to
two-channel sound (linear-PCM).
•
[Off]
- Disable the audio output from HDMI
devices connected to this player.
[Audio Sync]
Set the delay time for audio output when you play
a video disc.
1. Press
OK
.
2. Press
to set the delay time.
3. Press
OK
to confi rm and exit.
[Volume]
Set the default volume level when you play a disc.
1. Press
OK
.
2. Press
to set the volume.
3. Press
OK
to confi rm and exit.
[Sound Mode]
Select a preset sound effect to enhance the audio
output.
•
[3D]
- Select a virtual surround sound effect
that is produced from the left and right audio
channels.
•
[Movie Mode]
- Select a sound effect for movies.
•
[Music Mode]
- Select a sound effect for music.
[Speaker Setup]
Optimize the surround output for the connected
speakers.
English
EN
