Playing a Disc
16
Parental Control
Parental Control limits the DVD viewing that exceeds your
settings.The password is required to change the “PARENTAL
LEVEL”.
This feature prevents your children from viewing inappropriate
materials.
1
Press SETUP in stop mode.
2
Press
s
or
B
to select “CUSTOM”, then press OK.
• CUSTOM mode screen will appear.
3
Press
s
or
B
to select “PARENTAL”,
then press OK.
4
Press the numerical key pads to enter
your 4-digit password.
• When doing this for the first time,
enter any 4-digit number by pressing the numerical key pads
(except for 4737), then press OK.That number will be used
as the password from the second time onward. Record your
password in case you forget it.
• If you forget the password, press 4, 7, 3, 7.The original
password will be cleared and parental levels will be set to
“ALL”. Enter a new 4-digit password, then press OK.
5
Press
K
or
L
to select “PARENTAL LEVEL”, then press OK.
6
Press
K
or
L
to select the desired level, then press OK.
For details, see below.
7
Press SETUP to exit.
PARENTAL LEVEL
“ALL”
: All parental locks are cancelled.
“8”
: DVD softwares of any grades (adult/general/
children) can be played back.
“7 to 2”
: Only DVD softwares intended for general use and
children can be played back.
“1”
: Only DVD softwares intended for children can be
played back.
Note:
- This function may not work on some DVDs. Make sure if
the parental lock function operates in the way you have
set.
To Change the Password
1
Follow the steps
1
to
4
above.
2
Press
K
or
L
to select “CHANGE”, then press OK.
3
Enter a new 4-digit password, then press OK.
4
Press SETUP to exit.
DVD-V
PARENTAL
PARENTAL LEVEL
ALL
Subtitle Language
The DVD/VCR allows you to select a language for subtitle
during DVD disc (if available) playback.
1
Press DVD, then SUBTITLE during playback.
2
Press SUBTITLE repeatedly to select your desired subtitle
language.
• The selected language will be displayed on the display bar at
the top of the screen.
3
To turn off subtitles, press SUBTITLE repeatedly until “OFF”
appears.
Notes:
- If your language is not shown after pressing SUBTITLE
several times, the disc may not have that language.
However, some discs allow you to change audio language
or subtitle language setting in the disc menu. (Operation
varies depending on the disc, so refer to the manual
included in the disc.)
- If you choose a Language that has a 3-letter language
code, the code will be displayed every time you change the
Audio language setting. If you choose any other languages,
‘---’ will be displayed instead. (Refer to the language code
list on page 19.)
DVD-V
Camera Angle
Some DVD discs contain scenes which have been shot
simultaneously from various angles.You can change the camera
angle when the mark (
) appears on the screen.
If the “ANGLE ICON” setting is “OFF” in the Display setting,
the icon (
) will not appear. (Refer to Display Setting.)
1
Press DVD, then ANGLE during playback.
• The selected angle will be displayed on the display bar at the
top of the screen.
2
Press ANGLE repeatedly to select your desired angle.
DVD-V
Marker Setup Screen
Use markers to memorise your favourite places on a disc.
1
During playback, press SEARCH MODE repeatedly until the
Marker Setup screen appears on the TV screen.
2
Press
s
or
B
to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that
“- - - - : - - : - -” appears in the display.
3
When you reach the desired point, press OK.
• The Title or Track and elapsed time will appear on the TV
screen.
4
To return to a marker later, press SEARCH MODE repeatedly
until the Marker Setup screen appears and
s
or
B
to choose
the desired marker, then press OK.
Notes:
- Opening the disc tray, turning off the power or selecting
“AC” at step 2 and press OK will erase all markers.
- To clear a marker, using
s
or
B
, position the cursor on
to the marker number to be cleared and press CLEAR/C-
RESET.
- You can mark up to 10 points.
5
Press SEARCH MODE or RETURN to exit.
DVD-V
VCD
Audio Language
The DVD/VCR allows you to select a language during DVD
disc (if multi language available) playback.
1
Press AUDIO during playback.
2
Press AUDIO repeatedly to select your desired language.
Notes:
- If your language is not shown after pressing AUDIO several
times, the disc may not have that language. However, some
discs allow you to change audio language or subtitle
language setting in the disc menu. (Operation varies
depending on the disc, so refer to the manual included in
the disc.)
- If you choose a Language that has a 3-letter language
code, the code will be displayed every time you change the
Audio language setting. If you choose any other languages,
‘---’ will be displayed instead. (Refer to the language code
list on page 19.)
DVD-V
Stereo Sound Mode
1
Press AUDIO repeatedly during playback to select between
“STEREO”, “L-CH” or “R-CH”.
STEREO - both right and left channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active
Note:
- If the Virtual Surround setting is “ON”, the sound mode
will be fixed to “STEREO”, and can not be changed.
VCD
CD
CD
H9723AD(EN).qx3 04.6.25 3:28 PM Page 16
