DVD Setup
17
Display Setting
You can change the display functions.
1
Press SETUP in stop mode.
2
Press
s
or
B
to select “CUSTOM”,
then press OK.
• CUSTOM mode screen will appear.
3
Press
s
or
B
to select “DISPLAY”,
then OK to confirm.
4
Press
K
or
L
to select the below
items, then press OK.
5
Press SETUP to exit.
TV ASPECT :
4:3 LETTER BOX : when viewing a 16:9 picture on a 4:3 aspect TV
screen, black bars appear on the top and
bottom of the screen.
4:3 PAN & SCAN : when viewing a 16:9 on a 4:3 aspect TV screen,
a full height picture with both sides trimmed is
presented.
16:9 WIDE
: if a wide-screen TV is connected to this unit,
select this setting.
• Press
K
or
L
to select a setting, then press OK.
• The default setting is “4:3 LETTER BOX”.
STILL MODE :
AUTO
: select it usually.
FIELD
: pictures in the Still mode will be stabilised although
they will be coarse due to a little amount of data.
FRAME
: pictures in the Still mode will be highly defined
although they will be blurred due to outputting two
fields at the same time.
• Press
K
or
L
to select an option, then press OK.
• The default setting is “AUTO”.
ANGLE ICON :
ON:
: to show the angle icon when multiple camera angles
are available during DVD playback.
OFF
: to hide the angle icon.
• Press OK repeatedly to select “ON” or “OFF”.
• The default setting is “ON”.
AUTO POWER OFF :
ON:
: to turn off the unit automatically after 35 minutes of no use.
OFF
: to keep this unit on.
• Press OK repeatedly to select “ON” or “OFF”.
• The default setting is “ON”.
PROGRESSIVE :
ON:
: to turn on the PROGRESSIVE SCAN.
OFF
: to turn off the PROGRESSIVE SCAN.
• Press OK repeatedly to turn PROGRESSIVE “ON” or “OFF”.
• Choose “ON” if your TV has Progressive Scan and if the TV is
connected to the COMPONENT VIDEO OUT jacks on this
unit.Choose “OFF” otherwise.
• The default setting is “OFF”.
Notes:
– If “PROGRESSIVE” is “ON”, the message screen to activate
Progressive Scan appears. Press
K
or
L
to make a selection,
then OK.
– If you select “NO”, the menu disappears and “PROGRESSIVE” is
“OFF”.
– If you select “YES”, the confirmation message screen
appears. Confirm your setting, then press OK. If you select
“NO”, the menu screen disappears and “PROGRESSIVE” is
“OFF”. If you select “YES”, the menu screen will disappear
and “PROGRESSIVE” will be “ON”.
– If you do not press any buttons for 15 seconds, Progressive
Scan will switch to O
FF.
VIDEO OUT :
AUTO
: to change video out system (PAL/NTSC) automatically
according to the format of an inserted disc.
PAL:
: to view pictures of the discs recorded with PAL system.
• Press OK repeatedly to select “PAL” or “AUTO”.
• The default setting is “AUTO”.
QUICK
DVD-V
DISPLAY
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
ANGLE ICON
ON
AUTO POWER OFF ON
PROGRESSIVE
OFF
VIDEO OUT
AUTO
Language Setting
Language options are not available with some discs.
1
Press SETUP in stop mode.
2
Press
B
to select “CUSTOM”, then press OK.
• CUSTOM mode will appear.
3
Press
s
or
B
to select “LANGUAGE”, then OK to confirm.
4
Press
K
or
L
to select the below items, then press OK.
AUDIO :
Sets the audio language.
SUBTITLE :
Sets the subtitle language.
DISC MENU :
Sets the language for DVD Menu.
5
Press
K
or
L
to select a setting, then press OK.
• If “OTHER” is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the code for
the desired language.
(Refer to the language code list on page 19.)
• Only the languages supported by the disc can be selected.
6
Press SETUP to exit.
Note:
- Language Setting for Audio and Subtitle is not available
with some discs. In this case use the AUDIO and
SUBTITLE buttons.
(Refer to Audio Language/Subtitle Language.)
DVD-V
Audio Setting
Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD/VCR.
1
Press SETUP in stop mode.
2
Press
B
to select “CUSTOM”, then press OK.
CUSTOM mode will appear.
3
Press
s
or
B
to select “AUDIO”, then OK to confirm.
4
Press
K
or
L
to select the below items, then press OK.
DRC (Dynamic Range Control) :
To compress the range of sound vol-
ume
.
The default setting is “ON”.
DOWN SAMPLING :
Set to “ON” when outputting in 48kHz.
The default setting is “ON”.
When playing disc with copyright Protection
• If you select “OFF”, copyright protection will be activated and
sound will be down sampled at 48kHz.
DOLBY DIGITAL :
Set to “ON” when the player is connected to Dolby Digital
Decoder.
ON
: Output by Dolby Digital
OFF
: Convert the Dolby Digital to PCM
• The default setting is “ON”.
MPEG :
Set to “ON” when the player is connected MPEG Decoder.
ON
: Output by MPEG
OFF
: Convert the MPEG to PCM
• The default setting is “OFF”.
5
Press SETUP to exit.
QUICK
QUICK
AUDIO
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
ON
MPEG
OFF
Virtual Surround
You can enjoy stereophonic visual space on your existing stereo
system.
1
Press MODE during playback.
2
Press OK to set it “1”(Natural effect),
“2”(Emphasised effect) or “OFF”.
3
Press MODE or RETURN to exit.
Note (for Audio CD and Video CD play):
- Virtual Surround will not be effective if the sound mode
is set to something other than “STEREO”.
DVD-V
OFF
CD
MP3
VCD
DVD-V
To Reset All the Settings of the SET UP screen
1
Press SETUP in stop mode.
2
Press
s
or
B
to select “INIT.”, then press OK.
3
Press
K
or
L
to select “YES”, then OK twice. All the settings
(except for “PARENTAL”) will be cleared.
• To cancel the initialisation, select “NO”.
4
Press SETUP to exit.
• You can set “PROGRESSIVE” to “OFF” either in the DISPLAY menu
or pressing and holding the PLAY button on the front of the Player
for more than 5 seconds.
• When “PROGRESSIVE” is “ON”, video signals from the Player’s
VIDEO OUT and S-VIDEO OUT jacks will be distorted.
H9723AD(EN).qx3 04.6.25 3:28 PM Page 17
