20
First steps
Table of contents
b
The display shows general device-related data: Date and time,
remaining recording time in the selected memory, firmware
version of the device.
2
Press the stop key
j
to return to the stop mode.
4.6 Enable/disable the keypad lock
The keypad lock deactivates all keys on the device. The timer function
of the device continues to function.
1
Slide the HOLD switch up into the
HOLD
position to lock the
keypad of the device.
X
The display briefly shows ‘On Hold’ and turns off.
2
Slide the HOLD switch down to the Off position to disengage the
keypad lock.
X
The display briefly shows ‘Off Hold’ and turns off.
4.7 Insert microSD card
Caution
• Do not remove the memory card while recording is in progress. If
you do this, data may be damaged or lost.
1
DVT3000 – DVT7000: Flip the memory card slot cover to the
side.
2
Insert the microSD card into the card slot with the contacts facing
upwards.
3
Insert the memory card until it snaps into place.
4
To remove the card press the memory card slightly until the
snapping mechanism unlocks and the card is ejected.
Summary of Contents for DVT1000/00
Page 2: ...2 Table of contents ...
