42
Settings
Table of contents
9.1.8 Switching silent recording on and off
Use this function to turn off display indication, LED status, and the
signal tones during a recording. This allows you to record while there
is no visible indication on the display that a recording is being made.
1
In stop mode (start-up screen), press
MENU
.
2
Press the
h
/
b
key to select the record settings menu
Ó
.
3
Press
+ / –
to select the
Silent recording
function.
4
Press the record key,
g
, to confirm.
5
Press
+ / –
to enable/disable the function.
6
Press the record key,
g
, to confirm.
7
Press the
j
key to exit the menu.
Tip
• Press the
j
key to cancel the operation without saving and return
to the stop mode.
9.1.9 Enabling/disabling the pre-recording function
The pre-recording function allows to record the last five seconds
before you press the record key. The device switches into a standby
mode and records a five-second loop without saving it. Press the
record key to save the five-second loop.
1
In stop mode (start-up screen), press
MENU
.
2
Press the
h
/
b
key to select the record settings menu
Ó
.
3
Press
+ / –
to select the
Pre-recording
function.
4
Press the record key,
g
, to confirm.
5
Press
+ / –
to enable/disable the function.
6
Press the record key,
g
, to confirm.
7
Press the
j
key to exit the menu.
Tip
• Press the
j
key to cancel the operation without saving and return
to the stop mode.
