Philips EasyKey 7300, User Manual

16

17

2

1

2

2

3

1

1

Dead lock from inside

The sensor bolt can detect 

the signal when you close the 

door, and the motor will drive 

the main dead bolt to let it 

automatically pop up and 

lock the door.

The sensor bolt can detect the signal 

when you close the door, and the motor 

will drive the main dead bolt to let it 

automatically pop up   and lock the door.

After the door is locked, long press the 

[CLOSE] button until the button flashes in 

red and there is a voice prompt of "Inside 

deadlock enabled".

Under inside deadlock mode, all functions of the 
outside escutcheon will be locked. If you try to 
wake up the system manually, the keypad area will 
display the combination of “15937(X)” and there 
will be a voice prompt of “Inside deadlock enabled” 
reminding you that the door has been dead locked 
from inside.
Under deadlock mode, all operations on the 
outside escutcheon are disabled. Master PIN code 
verification or mechanical key opening is required 
to unlock the door from deadlock mode. 

5.How to use your EasyKey

Unlock | Unlock from outside 

With User PIN code

Touch

keypad

Enter a 

PIN code

Press the 

handle

With fingerprint

 With card

Finger

-print

Press the 

handle

Card 

reader

Press the 

handle

1

  Touch the keypad to 

wake up the system.

2

  Enter the registered 

user PIN code and 

confirm 

with [#].

3

  After hearing a voice 

prompt of “Door opened”, press 

down the handle to open the 

door.

1

  Place your registered 

finger properly on the sensor.

2

  After hearing a voice 

prompt of “Door opened”, 

press down the handle to 

open the door.

1

  Place your registered 

card on the card reader.

2

  After hearing a voice 

prompt of “Door opened”, 

press the handle to open 

the door.

Unlock | Unlock from inside  

With handle

Philips EasyKey employs indoor 

fast opening motise allowing 

you to directly press down the 

handle to unlock.

When you want to open the door 

from inside, please make sure the 

safe handle switch is toggled to 

green scale and the safe handle 

function is disabled.

Attention

Lock | Lock from outside/inside

Lock from outside

Lock from inside

Attention