Philips EasyKey 9000 Series, User Manual

10

11

◆

How to enter into Master Mode

1

  Light  up  the       

keypad.

2

 Press [#] before inputting any other 

numbers. After hearing a voice prompt 

of "Enter master  PIN code", enter your 

master PIN code and confirm with [#]. 

Then you are in master mode.

Add a one-time User PIN Code

Delete a User Record

Delete a single User PIN Code

Delete All User PIN Codes

Add a Fingerprint

Add a Key Tag

1

Modify master PIN code 

Enter the new master PIN code and 

confirm with [#] again. Re-enter 

the same master PIN code and 

confirm with [#]. After hearing a 

voice prompt of “Succeeded”, press 

[*] to return to previous menu until 

you finally exit master mode.

Enter [1] to modify master PIN code.

Enter [#], enter master PIN code and 

confirm with [#]. 

2

Enter [#], then enter master PIN code 

and confirm with [#]. 

Enter [2] to add a user record, then enter 

[1] to add a new user PIN code, and the 

system will automatically number it and 

generate a voice prompt.

1

Enter a user PIN code of 6 to 12 digits 

and confirm with [#]. Then re-enter the 

user PIN code and confirm with [#]. After 

hearing a voice prompt of “Succeeded”, 

press [*] until you exit master mode.

User settings

Add a user PIN code

Enter [#], enter master PIN code and 

confirm with [#]. 

Enter a one-time user PIN code of 6 to 

12 digits and confirm with [#]. Then re-

enter the one-time user PIN code and 

confirm with [#]. After hearing a voice 

prompt of “Succeeded”, press [*] until 

you exit master mode.

Enter [2] to enter into user setting, then 

enter [2] again to add a one-time user PIN 

code.

2 2

Enter [#], enter master PIN code and 

confirm with [#].  

Place your finger against the sensor. 

After hearing a voice prompt of “Take 

away your finger and enroll again”, 

please take away your finger and re-

place it against the sensor. After hearing 

a voice prompt of “Succeeded”, press [*] 

until you exit master mode.

Enter [2] to add a user record, then enter 

[3] to add a user fingerprint, and the 

system will automatically number it and 

generate a voice prompt.

2

3

Enter [#], enter master PIN code and 

confirm with [#]. 

Enter [2] to add a user record, then 

enter [4] to add a user key tag, and the 

system will automatically number it and 

generate a voice prompt.

Place the key tag against the card reader 

until you hear a beep. After hearing a 

voice prompt of “Succeeded”, press [*] 

until you exit the master mode.

2

4

1 1

3

Enter [#], enter master PIN code and 

confirm with [#]. 

Enter [3] to delete a user record, then 

enter [1] to delete a user PIN code, and 

then enter [1] to delete a single user PIN 

code.

Enter a user code (code: 00-09) of 2 

digits and confirm with[#]. After hearing 

a voice prompt of “Succeeded”, press [*] 

until you exit the master mode.

Enter [3] to delete a user record, then 

enter [1] to delete a user PIN code, and 

then enter [2] to delete all user PIN 

codes. After hearing a voice prompt of 

"Succeeded", press [*] until you exit the 

master mode.

Enter [#], enter master PIN code and 

confirm with [#]. 

1

3

2