2
&
Wall mounting instructions/Stand
According to the type of TV you’ve purchased a wall mount bracket and/or
stand may be supplied. How to mount the supplied stand and/or wall
mount bracket, see the supplied separate leaflet. Make sure that the wall
mount is being fixed securely enough so that it meets safety standards.
The weight of the TV (excl. packaging) is about 20 kg (32PF9966); 42 kg
(42PF9966); 58 kg (50PF9966).
é
Place or hang the TV wherever you want, but make sure that air can
circulate freely through the ventilation slots. Do not install the TV in a
confined space such as a book case or a similar unit.
To prevent any unsafe situations, no naked flame sources, such as lighted
candles, should be placed in the vicinity. Avoid heat, direct sunlight and
exposure to rain or water.
The equipment shall not be exposed to dripping or splashing.
“
Insert the aerial plug firmly into the aerial socket
x
at the bottom of the
TV. For best picture quality use the suppressor-aerial cable supplied.
‘
To connect your computer, see p. 20.
To connect other peripherals, see p. 19.
If you have a Cinema Link combination (Cinema Link Audio receiver and/or
Cinema Link recorder and/or DVD player), see the separate supplied
instruction manual, p. 25.
In order to obtain the best result, please use only the supplied aerial cable
between the TV and recorder, and between recorder and aerial connector.
(
Insert the mains cord supplied into the mains at the bottom of the TV and
in the wall socket having a mains voltage of 198-264V.
To prevent damaging the power (AC) cord which could cause a fire or
electric shock, do not place the TV on the cord.
§
Remote control
: Insert the 2 batteries supplied (Type R6-1,5V).
The batteries supplied do not contain the heavy metals mercury and cadmium.
Please check on how to dispose of exhausted batteries according to local
regulations.
è
Switch the TV on
: Press the power switch
B
at the right side of the TV.
An indicator on the front of the TV lights up and the screen comes on. If
the TV is in standby mode, press the
-P+
keys or the
B
key on the remote
control.
Should your remote be lost or broken you can still change some of the basic
settings with the keys on the right side of your TV.
Press:
• the
+
V
-
key to adjust the volume;
• the
+ P/CH -
key to select the TV channels or sources.
Press the
MENU
key to summon the main menu without the remote control.
Use:
• the
+
V
-
key and the
+ P/CH -
key to select menu items in the directions
as shown;
• the
MENU
key to confirm your selection.
Note:
When activated via the
MENU
key on the right side of the TV, only
Exit
lets you
remove the menu.
Navigate to
Exit
and press the
MENU
key.
MENU
P/CH
V
B
TV
Setup
Demo
Install
Exit
Picture Sound Ambilight Features
Keys on the right side of the TV
Preparation
