Mechanical instructions
EN 27
F21RE AB
4.
4.2.2
Power Supply Panel
Figure 4-5 Service position Power Supply (PS)
1.
Remove the front panel, if it was not yet removed.
2.
Remove the screws [1].
3.
Remove the fixation bracket [2].
4.
Pull the Power Supply panel out of the receiver box [3].
5.
Place the Power Supply panel in the small slots on the
edges of the top of the housing [4].
Warning: Be aware of the live voltages on this board
during operation!
4.2.3
Double Window Panel (if present)
Figure 4-6 Service position Double Window panel
When the metal top cover is removed, the Double Window
panel is accessible.
For the service position:
1.
Release the clamps [1] and push the panel gently up and
out of its bracket [2].
2.
One of the cables must be temporarily disconnected to
place the Double Window panel in its service position as
shown in the figure.
3.
Lead the removed cable in a favourable position and
connect this cable again.
4.2.4
Feature Box module
Figure 4-7 Service position Feature Box panel (FBX)
1.
Pull the clamps aside [1], and lift the Feature box module
[2].
2.
Disconnect the cables and take out the module.
3.
Remove the shielding of the module: de-solder the fixation
lugs.
4.
Remove the Feature Box panel from the module.
5.
Connect the cables and place the Feature Box panel in
service position in the regarding bracket.
4.2.5
Small Signal Panel
Figure 4-8 Removal of the Feature Box bracket
1.
Release the clamps that secure the feature box module.
2.
Lift the feature box module, disconnect the regarding
cables and take out the module.
3.
Release the side clamps that secure the Feature box
bracket.
4.
Remove the screw in the middle of the feature box position
and remove the complete bracket.
PS panel
2
3
1
1
CL 16532098_016.eps
240901
4
DW panel
DW/FBX bracket
2
1
1
CL 26532054_010.eps
150502
3
CL 16532098_014.eps
140901
FBX Module
2
1
1
CL 16532098_031.eps
140901
SSP panel
Summary of Contents for F21RE
