8
You can use the steam iron in vertical position to remove wrinkles from hanging fabrics.
1
Hold the iron in vertical position, press the steam trigger and touch the garment lightly with the
soleplate and move the iron up and down (Fig. 9).
Auto shut-of
-
The appliances enters the standby mode if it has not been used for 15 minutes. The “iron ready”
light starts to lash.
-
To activate the appliance again, press the steam trigger. The appliance starts to heat up again.
-
The appliance switches of automatically if it has not been used for another 10 minutes after it
enters the standby mode. The “iron ready” light goes of.
Warning: Never leave the appliance unattended when it is connected to the mains.
Always unplug the appliance after use.
Cleaning and maintenance
Smart Calc-Clean System
Your appliance has been designed with a Smart Calc-Clean system to ensure that descaling and
cleaning is done regularly. This helps to maintain a strong steam performance and prevents dirt and
stains coming out of the soleplate over time. To ensure that the cleaning process is performed, the
appliance gives regular reminders.
Sound and light Calc-Clean reminder
After 1 to 3 months of use, the Calc-Clean light starts lashing and the appliance starts beeping to
indicate that you have to perform the Calc-Clean process (Fig. 10).
Besides that, a second defense step to protect the appliance from scale is integrated: the steam
function gets disabled if descaling is not done (Fig. 11). After descaling is done, the steam function will
be restored. This takes place regardless of the type of water used.
Note: The Calc-Clean process can be performed at any time, even when the sound and light reminder
is not activated yet.
Performing the Calc-Clean process with the Calc-Clean
container
Warning: Do not leave the appliance unattended during the Calc-Clean process.
Caution: Always perform the Calc-Clean process with the Calc-Clean container. Do not interrupt
the process by lifting the iron up from the Calc-Clean container, as hot water and steam will come
out of the soleplate.
1
Fill up the water tank halfway (Fig. 12).
Note: Make sure that the appliance is plugged in and switched ON during the Calc-Clean process.
2
Place the Calc-Clean container on the ironing board or any other even, stable surface (Fig. 13).
3
Place the iron stably on the Calc-Clean container (Fig. 14).
4
Press and hold the CALC-CLEAN button for 2 seconds until you hear short beeps (Fig. 15).
English
Summary of Contents for FASTCARE COMPACT GC6700 Series
