– 37 –
THE FAX
Changing the transmission speed
Your fax machine automatically adjusts its transmission speed to the quality of the telephone line. If the line quality is poor,
the automatic adjustment will take more time. In case that the poor line quality is already known it is useful to set the
machine at a slower speed from the very beginning. This will save time and money.
1
4
7
2
5
8
0
3
6
9
#
∗
OK
FUNCTION
Select function 21.
21 SLOW(4800BPS)
OK
FUNCTION
Press the OK key.
4800 BPS: NO
OK
FUNCTION
Make the desired adjustments with the CURSOR LEFT or CURSOR
RIGHT key, then press the OK key.
15-MAY-00 12:30
Transmission report—error report
If you like your fax machine can print a transmission report every time you send a document. This way you are given
confirmation that your document has been received. You can switch on this function if required. If an error occurs during
transmission you will be informed on the error report, which is printed out even if the transmission report function is
switched off.
1
4
7
2
5
8
0
3
6
9
#
∗
OK
FUNCTION
Select function 43.
43 transm.report
OK
FUNCTION
Press the OK key.
TRANSM. REP.:off
OK
FUNCTION
Select using CURSOR LEFT and CURSOR RIGHT keys, then press
the OK key.
15-MAY-00 12:30
Receiving faxes in memory—paperless fax reception
If there is no more paper in the paper feed mechanism or if the ink film is finished, any incoming fax will be received into
memory. The DMM pointer appears on the display to indicate that the memory contains documents.
The display shows the number of the sending fax machine or, if the
sender has not stored any ID information, the following message is
displayed:
RECEIVING ...
FINE
PHOTO
DMM
+43 1 12345
FINE
PHOTO
DMM
As soon as paper and/or ink film are loaded, the fax machine
automatically prints out all documents in memory.
PRINTING ...
FINE
PHOTO
DMM
When a fax message has been fully printed, it is deleted automatically from memory. If the printing process is interrupted,
all fax messages not completely printed remain in memory.
If the memory is full, the CHECK DISPLAY lamp flashes and the message “MEMORY FULL” appears on the display. Your
fax machine cannot store any more pages in memory.