FC9190/01
3-9
• When the Motor and/or Cordwinder have to be
replaced the Upper housing (
17
) must be removed.
• First remove Brake lever (
13
) and the spring than
remove screw
C
so you can remove cordwinder cover
(
14
). Take care that the spring does not fall into the
appliance! (see picture).
C
• After removing the 5 screws
D
and 3 screws
E
on the
back side, the Upper housing can be seperated from the
Lower housing (see pictures).
D
D
D
D
D
E
E
E
• When replacing the Cordwinder (
21
) the Lower housing
insert (
19
) needs to be removed. Move the Lower
housing insert upwards so the cordwinder can easily be
removed (see picture).
• When assembling take care that the wires from motor
to cordwinder are correctly fixed (see picture).
• The frame that holds Triple filter (
18
) is attached to
the Upper housing, to remove the frame remove screw
F
(see picture).
F
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
