8
EN
Connect power and switch
on
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the device.
•
Risk of electric shock! When you unplug the AC cord,
always pull the plug from the socket. Never pull the
cord.
•
Before you connect the AC cord, make sure that you
have completed all the other connections.
1
Read the power connection instructions
on the app.
2
Connect the AC power cord to
• the
DC IN
socket on the back of the
device.
• the wall power socket.
»
The device switches on automatically.
»
The power/status indicator blinks
amber during boot-up.
»
After a while, for first-time setup, the
power/status indicator turns solid
amber.
3
Tap
Next
on the app screen to continue.
Switch between normal and Eco power
standby mode
• To switch the device to normal standby
mode, briefly press
.
»
The power/status indicator turns green.
• To switch the device to Eco power standby
mode, press and hold
for less than 3
seconds and then release the button.
»
The power/status indicator turns
amber for a short while and then turns
off.
• To switch the device on from normal or
Eco power standby mode, briefly press
again.
Operation
LED status
On -> Nor-
mal standby
Briefly press
.
Amber/white
-> Green
On/Normal
standby ->
Eco power
standby
Press and hold
for less than 3
seconds and then
release the button.
Amber/white
or green ->
Off
Normal
standby/
Eco power
standby ->
On
Briefly press
.
Green/Off ->
Amber/white
Summary of Contents for Fidelio AW1000
Page 2: ......