11
English
2
Insert 2 AAA batteries with correct
~Q "
3
Close the battery compartment.
Note
If you are not going to use the remote control
for a long time, remove the batteries.
Do not use old and new or different types of
batteries in combination.
Batteries contain chemical substances, so they
should be disposed of properly.
Set clock
1
In standby mode, press and hold
PROG/
<"<'-6
for more than two seconds
to activate the clock setting mode.
»
The 12 hour or 24 hour format is
displayed.
2
Press /
to select 12 hour or 24
hour format, and then press
PROG/
<"<'-6
.
»
The hour digits are displayed and begin
to blink.
a
b
c
Connect power
Caution
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
you have completed all other connections.
Connect the power cord to:
the
AC~MAINS
jack on the back of the
main unit.
the wall outlet.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from
%%"; !
"
To insert the remote control battery:
1
Open the battery compartment.
EN
