background image

23

English

3139 115 21361

Before setting timer, make sure the music source
has been prepared.

CD

 – Load the disc(s). To start from a specific

track, make a programme (refer to “CD
Operation - Programming the disc tracks”).

TUNER

 – tune to the desired radio station.

3

Press

à

 or 

á

 on the system repeatedly to set

the hour for the timer to start.

4

Press

í

 or 

ë

 on the system repeatedly to set

the minute for the timer to start.

5

Press 

CLOCK•TIMER

 to store the timer.

TIMER

 remains on the display.

At the preset time, the selected sound source
will play.

To exit without storing the setting

Press 

Ç

on the system.

Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected.  If all the disc trays are not
available, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.

Deactivating the timer

1

Press and hold 

CLOCK

TIMER

 for more than

two seconds

.

2

Press 

Ç

 on the system to cancel the timer.

"

OFF

" is displayed and the 

TIMER

 disappears.

Activating the timer 

(for the same preset

time and source)

1

Press and hold 

CLOCK

TIMER

 for more than

two seconds

.

2

Press 

CLOCK

TIMER

 again to store.

TIMER

 is shown.

Sleep timer setting

The sleep timer enables the system to switch to
standby mode automatically at a preset time.

1

Press 

SLEEP

 on the remote control repeatedly

to select a preset time.

The selections are as follows (time in

minutes):

15

 

 

30

 

 

45

 

 

60

  

  

OFF

 

 

15

 …

"

SLEEP XX

" or "

OFF

" is displayed. "

XX

" is the

time in minutes.

2

When you reach the desired length of time, stop
pressing the 

SLEEP

 button.

SLEEP

 is shown, except for "

OFF

" mode.

The sleep timer is now set. Before the system

switches to standby mode, a countdown of 10
seconds is displayed.

"

SLEEP 10

 "

SLEEP 9

".... 

 

"

SLEEP 1

"

 "

SLEEP

"

To check the remaining length of time
after sleep timer is activated

Press 

SLEEP

 

once

.

To change the preset sleep timer

Press 

SLEEP

 again while the remaining sleep

timer is shown.

The display will show the next sleep timer

options.

To deactivate the sleep timer

Press 

SLEEP

 repeatedly until "

OFF

" is displayed,

or press the 

STANDBY ON

 button.

Clock/Timer

pg 001-026/C115/22-Eng

12/24/01, 9:40 AM

23

Summary of Contents for FW-C115/22



























Reviews: