23
English
3139 115 20143
CD Synchro Start Recording
1
Load a blank tape into tape deck 2 and a disc
into a disc tray.
2
Press
CD
to select CD mode.
¶
You can programme the tracks in the order you
want them to be recorded (see Programming
Tracks). If not, select the disc by pressing
CD
(CD 1•2•3) and the tracks are recorded
according to the order on the selected disc.
3
Press
RECORD
to start recording.
➜
The
REC
starts flashing.
¶
Disc will start playback automatically.
4
Press
Ç
to stop recording.
Dubbing tapes
(from tape deck 1 to tape
deck 2)
1
Press
TAPE
( TAPE 1•2 ) to select tape deck 2.
2
Load the prerecorded tape into tape deck 1 and
a blank tape into tape deck 2 with full spool to
the left.
3
Press
DUBBING
.
➜
"
DUB
" with "
2
" scrolling right will be displayed.
¶
Dubbing will start immediately.
➜
The
REC
starts flashing.
4
Press
Ç
to stop dubbing.
Notes:
– At the end of side A, flip the tapes to side B and
repeat the procedure.
– Dubbing of tapes is only possible from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
– You can switch to other source while dubbing.
Recording from other sources
(only on tape deck 2)
1
Load a blank tape into tape deck 2 with the
open side downward.
2
Press
CD
,
TUNER
or
AUX
.
¶
Start playback of the selected source.
3
Press
RECORD
to start recording.
➜
The
REC
starts flashing.
4
Press
Ç
to stop recording.
Notes:
– During recording, it is not possible to listen to
another source.
Recording
pg 01-28/C200/21-Eng
29/05/2001, 10:13 AM
23