16
English
3139 116 19341
3
Press
RDS
.
™
The message "
SEARCH RDS
TIME
" will be displayed.
™
If the current station is not receiving
any RDS information, "
NO RDS
TIME
" will be displayed.
™
When the RDS clock is read, "
RDS
TIME
" will be displayed. The
current clock time is displayed for 2
seconds and will be stored
automatically.
™
If within 90 seconds, the RDS time is
not detected, "
NO RDS TIME
" will
be displayed.
Note:
– Some RDS station may be transmitting a
real time clock at a minute interval. The
accuracy of the transmitted time
depends on the transmitting RDS
station.
News
(only available in Radio Station
with RDS)
You can activate NEWS function in Standby
or any source mode except Tuner mode.
Once the News PTY (program type) is
detected in a RDS station, it will switch to
TUNER mode automatically.
To start NEWS function
1
Press
NEWS
.
• The
NEWS
and "
NEWS
" will be displayed.
• It will scan stations stored in the first 5
preset and wait for the News Program
Type data to be available in any of these
RDS stations. During the search :
™
The current source activity will
remain uninterrupted.
™
If no RDS station is found in the first
5 presets, the NEWS function will be
switched off. The display will show
"
NO RDS NEWS
" and
NEWS
will
disappear from the display.
• When NEWS transmission is detected,
the system will switch to Tuner mode.
™
The
NEWS
starts flashing.
To cancel NEWS function
• Press
NEWS
again.
™
The
NEWS
disappears and "
NEWS
OFF
" will be displayed.
Notes:
– If you are listening to a non RDS TUNER
radio station and should you decide to
hear NEWS, first select other source
(e.g. CD, TAPE or AUX), then press
NEWS.
– Before using the NEWS feature, ensure
that the first 5 presets are RDS stations.
– The NEWS works only once for each
activation.
– During News bulletin, you can press any
available source or Tuner function keys
to cancel NEWS function and execute
the relevant source mode.
– If set is switched to Tuner source, the
NEWS function will be cancelled,
"
NEWS OFF
" will be displayed
immediately after the "
TUNER
"
message.
TUNER
pg 01-24/C28/34-Eng
2/23/00, 8:06 AM
16