1. Press
catch
inwards
2. Pull out
AF9
board
C2
C
C
C3
Figure 7
2-2
2-2
Figure 8
Figure 11
Figure 12
Figure 9
Dismantling of the Front Board and ETF7 module
1) Remove the Jog and Volume knobs (pos 138 & 139) as
stated in Dismantling the Cover Front Display.
2) Loosen 3 screws D to remove the Bracket CDC Right (pos
252) as shown in figure 8.
3) Loosen 3 screws E to remove the Karaoke board and
Headphone board.
4) Loosen 11 screw F to remove the Front Board.
5) Loosen 6 screws G to remove the ETF7 Module (pos
1104).
Dismantling of the Bottom assembly
1) Loosen 2 screws J and lift-up the Power Board / Heatsink
assembly from the Bottom plate (pos 265) as shown in
figure 11.
2) Loosen 2 screws K to remove the Fan / Bracket assembly
as shown in figure 12.
3) Loosen 4 screws L for the Mains Transformer to remove
the Mains Transformer / Mains Board assembly.
Note:
During re-assembly care should be taken to
ensure the fan blade and wires are in the right
direction and position.
Detaching the AF9 board and Front Cabinet Assembly from the Bottom/Rear assembly
1) Release 2 catches C2 to free the AF9 board from the Front
Cabinet Assembly as shown in figure 7.
2) Loosen 1 screw M on the Rear panel (pos 256) to remove
the AF9 board as shown in figure 10.
3) Loosen 2 screws C at the bottom of the Front Cabinet on
both sides of the set.
4) Release 2 catches C3 on both sides of the Front Cabinet
(pos 101) and pull the Front Cabinet assembly out of the
Bottom plate (pos 265).
Dismantling of the Rear Panel
1) Loosen 5 screws H as shown in figure 10.
2) Release 2 catches C4 on the Mains Socket body to free the
Mains Socket board.
3) Release 2 catches C5 on both sides of the Rear Panel (pos
256) with the help of a minus screw driver and pull out the
Rear Panel.
Figure 10
M
N
C1
H
C5
C4
