20
English
3140 115 29981
Notes:
– If you attempt to store more than 40 preset
radio stations, "
PROGRAM FULL
" will be
displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
Programme mode automatically.
Tuning to Preset Radio Stations
●
Once you’ve preset the radio stations, press
í
or
ë
to select the desired preset number.
➜
The preset number, radio frequency, and
waveband will appear on the display.
Erasing a Preset Radio Station
1
Press
í
or
ë
to select the preset radio station
to be erased.
2
Press and hold
Ç
on the system until “
PRESET
DELETED
” appears on the display.
➜
The radio frequency remains on the display.
➜
The preset numbers of all other preset radio
stations in the band with higher numbers are also
decreased by one.
●
Repeat
steps 1–2
to erase other preset radio
stations.
For Recording, please refer to “Tape
Operation/Recording”.
Radio Reception
RDS
RDS (Radio Data System) is a broadcasting
service that allows FM stations to send additional
information along with the regular FM radio
signal. This additional information can contain:
Station name:
The radio station name is
displayed.
Programme type
: The following programme
types exist and can be received by your tuner:
News, Affairs, Info, Sport, Educate, Drama,
Culture, Science, Varied, Pop M, Rock M, M.O.R.
(middle of the road music), Light M, Classics,
Other M, No type.
Radio text (RT):
text messages appear on the
display.
Receiving RDS Radio Station
●
Tuned to a radio station from FM band.
➜
If the radio station transmitting RDS signal,
the RDS logo (
) and the radio station name
will appear on the display.
To check the RDS information
●
Press
RDS
repeatedly to scroll through the
following information (if available) : STATION
NAME
™
PROGRAMME TYPE
™
RADIO TEXT
™
TUNED FREQUENCY
™
STATION NAME ....
Notes:
– If the tuned radio station does not transmit RDS
signal or is a non RDS station, "
NO RDS
" will be
displayed.
– If the RDS text message is not available at the
RDS station, "
NO RDS TEXT
" will be displayed.
RDS Time
Some RDS station may be transmitting a real
clock time at an interval of every minute.
Setting the RDS time
1
Press
CLOCK•TIMER
twice
.
➜
"
00:00
" or current time starts flashing.
2
Press
RDS
.
➜
"
SEARCH RDS TIME
" will be displayed.
➜
When RDS time is read, "
RDS TIME
" will be
displayed. The current time will be displayed for
2 seconds and stored automatically.
➜
If the RDS station does not transmit RDS
time within 90 seconds, "
NO RDS TIME
" will be
displayed.
