24
English
3140 115 29981
Tape Operation/Recording
Dubbing Tapes
1
Load the prerecorded tape in tape deck 1.
●
You can set the tape to the desired passage
where recording will start.
2
Press
DUBBING
.
➜
Playing and recording will start simultaneously.
➜
"
DUB OOO
" will be displayed.
●
Dubbing of tapes is possible on one side of the
tape only. To continue record on the reverse
side, at the end of side A, flip the tapes to side B
and repeat the procedure.
Listening to External Sources
1
Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
2
Press
AUX
(CDR/DVD) repeatedly to select
CDR/DVD mode or normal AUX mode.
➜
"
CDR
/
DVD
" or "
AUX
" will be displayed.
External Sources
●
When CDR/DVD mode is selected, any audio
equipment connected to the LINE OUT
terminals of this mini system will be muted. You
will not be able to record or listen to the sound
from the LINE OUT source.
●
If the sound from the external source is
distorted, select CDR/DVD mode for listening.
Notes:
– You are advised not to listen to and record from
the same source simultaneously.
– All the navigation sound control features (DSC
or VAC for example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
For Recording, please refer to “Tape
Operation/Recording”.
To stop dubbing
●
Press
Ç
.
Notes:
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
– You can listen to another source while dubbing.
Digital Recording via Digital Out
For CD digital recording, please refer to the
instruction manuals for the CD recorder, digital
audio equipment and so forth.
