11
English
Connections
WARNING!
– Please note that the voltage selector
located at the rear of this system is
preset at 220V from the factory.
For countries that operate at 110V-127V,
please adjust to 110V-127V before you
switch on the system.
– Use only the supplied speakers.
The combination of the main unit and
speakers provide the best sound. Using
other speakers can damage the unit and
sound quality will be negatively affected.
– Never make or change connections
with the power switched on.
– Connect the AC power cord to the
power outlet only after you have finished
hooking up everything.
Step 1:
Connecting FM / AM
antennas
– Place the AM loop antenna on a shelf or
attach it to a stand or wall.
– Extend the FM antenna and fix its ends to the
wall.
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible from a
TV, VCR or other radiation source to prevent
unwanted noise.
– For better FM stereo reception, connect
external FM antenna.
Step 2:
Connecting the
speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "
R
" and left speaker to
"
L
", coloured (marked) wire to "
+
" and black
(unmarked) wire to "
-
". Fully insert the
stripped portion of the speaker wire into the
terminal as shown.
Notes:
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
– Do not connect more than one speaker to any
one pair of
+
/
-
speaker terminals.
Step 3:
Connecting to PC
Use the supplied USB cable to connect the
system to your personal computer’s USB port.
After installed the USB PC LINK application
software onto your PC, you are able to playback
your music collection via the system (refer to
“
USB PC Link
”).
Step 4:
Connecting to game
console
IMPORTANT!
Gameport inputs are solely for game
console only.
a.
Use the game console’s video cable (not
supplied) to connect its video output to the
GAMEPORT-
VIDEO
terminal.
b.
Use the game console’s audio cables (not
supplied) to connect its audio outputs to the
GAMEPORT-
AUDIO L. / AUDIO R.
terminals.
c.
Use a video cable (yellow) to connect the
VIDEO OUT
terminal to the video input on
the TV for viewing.
Notes:
– On the TV, the Video Input jack is usually yellow
and might be labeled A/V In, CVBS, Composite or
Baseband.
– To avoid magnetic interference, do not position
the front speakers too close to your TV.
Helpful Hint:
For optimal enjoyment of your Gaming
Experience, it is advisable that you avoid
connecting the TV’s AUDIO OUT to the audio
system’s
AUX IN (R / L)
terminals.
If you wish to listen to your favorite movies /
TV programmes through the Philips Mini
System, please disconnect the Game Console
connection on the front of the set to avoid
experiencing any unwanted noise.
