Philips FW-C83 User Manual Download

Page: 16 / 29

English

3139 116 19611

Erasing the program

(when

playback is stopped)
• Press

™

PROGRAM CLEARED

" will be

displayed.

Note:
– The program will be erased when the

system is disconnected from the power
supply or when the CD carousel tray is
opened.

Shuffle

(only on remote control)

In shuffle mode, the system plays all the
available discs and their tracks in random
order. Shuffle may be used also when
tracks are programmed.

To shuffle all the discs and tracks
1

Press

SHUFFLE

™

SHUFFLE

" will be displayed.

™

The

SHUFFLE

, the disc and the track

selected at random appear on the
display.

• The discs and the tracks will be played

in random order until you press

• If you press

REPEAT

during shuffling,

the current track or all available discs
will be played repeatedly.

™

TRACK

" or "

ALL DISC

" will be

displayed.

™

The

REPEAT

and

SHUFFLE

appear on the

display.

Playing the program

Press

PLAY

ÉÅ

to start program

playback.

™

PLAY PROGRAM

" will be

displayed.

™

The track number and elapsed
playing time of the current track will
appear on the display.

• If you press

REPEAT

during program

playback, the current track or all
programmed tracks will be played
repeatedly.

™

TRACK

" or "

PROGRAM

" will be

displayed.

™

The

REPEAT

and

PROGRAM

appear on

the display.

Press

to stop program playback.

Notes:
– If you press any of the CD DIRECT PLAY

buttons, the system will play the
selected disc or track and the stored
program will be ignored temporarily. The

PROGRAM

display also will disappear

temporarily from the display. It will
reappear when playback of the selected
disc ends.

– REPEAT DISC mode is not available

when program playback begins.

Press

SHUFFLE

again to resume normal

playback.

™

The

SHUFFLE

disappears from the

display.

Note:
– REPEAT DISC mode is not available

when shuffle is selected.

Repeat

(only on remote control)

You can play the current track, a disc or all
available discs repeatedly.

Press

REPEAT

on the remote control to

select the various repeat modes.

™

TRACK

", "

DISC

", "

ALL DISC

" or

OFF

" will be displayed.

™

The

REPEAT

appears on the display.

• The selected track, selected disc or all

available discs will now be played
repeatedly until you press

Press

REPEAT

until the "

OFF

" mode is

displayed to resume normal playback.

™

The

REPEAT

disappears from the

display.

Notes:
– REPEAT DISC mode is not available

during program play or shuffle mode.

– You can also repeat shuffling a program.

™

“

TRACK

“

or “

PROGRAM

" will be

displayed.

™

The

REPEAT

PROGRAM

and

SHUFFLE

appear on the display.

pg 01-29/C85-C83/22-Eng

3/6/00, 1:00 PM

Summary of Contents for FW-C83






























Search results

Summary of Contents for FW-C83

Reviews:

Related manuals for FW-C83

Brands by name

Popular brands

Philips FW-C83, User Manual

Search results

Summary of Contents for FW-C83

Reviews:

Related manuals for FW-C83

Brands by name

Popular brands