15
English
Functional Overview
Controls on the system
1
ECO POWER
–
to switch the system on or to Eco Power
Standby mode.
2
STANDBY ON
2
–
to switch the system on or to Standby mode.
3
DISPLAY SCREEN
–
to view the current status of the system.
4
DISC TRAYS
5
DISC CHANGE
–
to change disc(s).
6
DISC 1 / DISC 2 / DISC 3
–
to select a disc tray for playback.
7
OPEN•CLOSE
–
to open or close the disc tray.
8
INTERACTIVE VU METER
–
to show the VU (volume unit) meter in music or
volume mode depending on the display mode
selected.
9
SENSOR
–
point the remote control towards this sensor.
0
VOLUME
–
to increase or decrease the volume.
!
Tape Deck Operation
AUTO REPLAY
–
to select continuous playback in either AUTO
PLAY or ONCE mode only.
DUBBING
–
to dub a tape.
REC
–
to start recording on tape deck 2.
@
VOCAL
–
to fade out the original vocal from Karaoke or to
switch between mono or stereo mode during
audio disc playback.
#
JOG CONTROL
–
to select the desired sound effect for the
selected sound feature.
$
KEY CONTROL
–
to change the tone level to suit your vocal range.
I
.................to decrease the key tone level.
.................to restore the key tone level to
original setting.
i
.................to increase the key tone level.
%
ECHO
–
to adjust the echo level for karaoke after
inserting the microphone.
^
SOUND
–
to activate or deactivate the surround sound
effect.
&
wOOx ON•OFF
–
to select enhanced or normal wOOx sound
effect.
wOOx LEVEL
–
to select a desired wOOx level: WOOX 1,
WOOX 2 or WOOX 3.
*
MIC/LEVEL
–
to connect microphone jack.
–
to adjust the mixing level for karaoke or
microphone recording.
(
0
–
to open the tape deck door.
)
TAPE DECK 1
¡
TAPE DECK 2
™
SOURCE
–
to select the following:
DISC (DISC 1•2•3)
–
to select disc tray 1, 2 or 3
TUNER (BAND)
–
to select waveband: FM or MW.
TAPE (TAPE 1-2)
–
to select tape deck 1 or 2.
AUX/TV
–
to select a connected external source: TV/CDR
or AUX (auxiliary) mode.
£
Mode Selection
PLAY/PAUSE
38
for DISC .................... to start or interrupt playback.
for TAPE ..................... to start playback.
for PLUG&PLAY ... (
on the system only
) to initiate
plug & play mode.
SEARCH•TUNING
1 ¡
(ALBUM – / +)
for DISC .................... to search backward/forward.
for TAPE ..................... to rewind or fast forward.
for TUNER ............... to tune to a lower or higher
radio frequency.
for CLOCK .............. (
in standby mode
)to set the
minute and hour.
DEMO STOP/CLEAR
7
for DISC .................... to stop playback or to clear a
programme.
for DEMO ................ (
in Standby or ECO power
mode
) to activate/deactivate
demonstration.
for PLUG&PLAY ... (
on the system only
) to exit
plug&play mode.
