36
English
Manual preset programming
1
Press
TUNER
(BAND) repeatedly to select the
desired tuner band: FM or MW.
2
Press and hold
1
/
¡
on the system or
4
/
¢
on the remote control to search a
radio frequency.
3
Press
PROGRAM
.
➜
“
PROG
” and “
P 01
” will display.
4
Press
O
/
P
on the system,
2
/
3
or
numeric keys (0-9)
on the remote control to
select the desired preset number.
5
After selecting an address number, press
PROGRAM
again to store the radio station.
●
Repeat
steps 3-5
to store other preset radio
stations.
To stop storing the manual preset
●
Press
7
on the system.
Note:
– If you attempt to store more than 40 preset
radio stations, “FULL” will be displayed.
Selecting a preset radio station
●
In tuner mode, press
2
or
3
or use the
numeric keys (0-9)
to select the desired
preset number.
➜
The preset number, radio frequency, and
waveband are displayed.
Deleting a preset radio station
1
Press
O
or
P
to select the preset radio station
to be erased.
2
Press
7
on the system, “
PRESET DELETED
”
appears on the display.
➜
The radio frequency remains on the display.
➜
The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
●
Repeat
steps 1-2
to erase other preset radio
stations.
Changing tuning grid
In some countries, the frequency step between
adjacent channels in the MW band is 9 kHz (10
kHz in some areas). The preset frequency step in
the factory is 9 kHz.
1
Plug the AC power cord.
2
Press
TUNER
to select MW mode.
3
Press and hold
9
for more than 3 seconds when
reconnecting the system to the AC power
supply.
➜
“
STEP XX K
” appears.
Note:
– All preset stations will be lost and need to be
reprogrammed.
Tuner Operations
