28
English
3139 115 20823
Clock/Timer
STANDBY-ON
PROGRAM
DIM
VCD MP3-CD MINI HIFI SYSTEM
C D 1 • 2 • 3
BAND
TAPE 1 • 2
TAPE
VCD
TUNER
AUX
STOP•CLEAR PLAY• PAUSE
D
B
B
VIDEO
O
P
TI
M
AL
JA
ZZ
R
O
CK
TE
C
H
N
O
DSC
RECORD DUBBING A.REPLAY
VOLUME
CLOCK•TIMER
RETURN
PBC
DEMO STOP
PAL/NTSC
SEARCH•TUNING
PREV
NEXT
PRESET
▲
▲
MP
3-CD
ALBUM
+
TITLE +
MICROPHONE - LEVEL
View Clock
You can view the clock (if it is set) if the system
is in Standby mode or when any sound source is
selected (VCD, TUNER, etc.). The clock will be
displayed for about seven seconds.
¶
Press
CLOCK
•
TIMER
briefly
(on the system
only)
.
➜
“
10
:
38
PM
or
22
:
38
” (the current time)
will be displayed depending on whether you
have selected 12- or 24-hour mode.
➜
“
--
:
--
” will be displayed if the clock is not
set.
Clock Setting
The clock can be set in either 12- or 24-hour
mode, e.g. “
12
:
00
AM
“ or “
00
:
00
“. Before
setting the clock, you must be in the View Clock
mode.
1
Press
CLOCK
•
TIMER
to select clock mode.
2
Press
PROGRAM
to select 12- and 24- hour
mode.
➜
If 12-hour mode is selected, “
12
:
00
“ starts
flashing and the
AM
lights up.
➜
If 24-hour mode is selected, “
00
:
00
” starts
flashing.
3
Set the hour with
à
or
á
on the system.
4
Set the minute with
í
or
ë
on the system.
5
Press
CLOCK
•
TIMER
again to store the
setting.
➜
The clock starts.
¶
To exit without storing the setting, press
Ç
on
the system.
Notes:
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
– When a power interruption occurs, the clock
setting is erased.
Timer Setting
¶
The system can switch on to VCD , TUNER or
TAPE 2 mode automatically at a preset time. It
can serve as an alarm to wake you up.
¶
Before setting the timer, make sure the clock is
set correctly.
¶
The timer will always be switched on once it is
set.
¶
The volume of the timer will increase
from the minimum level to the most
recently selected volume level.
1
Press and hold
CLOCK
•
TIMER
for more than
two seconds
to select timer mode.
➜
“
12
:
00
AM
” or “
00
:
00
" or the last timer
setting starts flashing depending on whether you
have selected 12- or 24-hour mode.
➜
The
TIMER
starts flashing.
➜
The selected source is lit while other available
sources are flashing.
2
Press
VCD
,
TUNER
or
TAPE
to select the
desired source.
¶
Before selecting VCD or TAPE, make sure a disc
or tape is loaded in the disc tray or tape deck 2.
pg 01-032/V220/21-Eng
28/05/2001, 09:03 AM
28
