3139 116 20021
23
English
5
Press
CLOCK•TIMER
again to store the
setting.
™
The clock starts.
• To exit without storing the setting, press
Ç
on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to VCD,
TUNER or TAPE 2 mode automatically at
a preset time. It can serve as an alarm
to wake you up.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
•
The volume of the timer will
increase from the minimum level
until the volume level before the set
is switched to standby mode.
1
Press and hold
CLOCK•TIMER
for more
than
2 seconds
to select timer mode.
™
"
12
:
00
AM
"
or
"
00
:
00
" or the last
timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
™
The
TIMER
flag starts flashing.
™
The selected source is lit while other
available sources are flashing.
2
Press
VCD, TUNER
or
TAPE
to select
the desired source.
• Before selecting VCD or TAPE, make
sure a disc or tape is loaded in the disc
tray or tape deck 2.
3
Press
à
or
á
on the system to set
the hour for the timer to start.
4
Press
í
or
ë
on the system to set the
minute for the timer to start.
5
Press
CLOCK•TIMER
to store the start
time.
™
The timer is now set.
™
The
TIMER
flag remains on the
display.
• At the preset time, the timer will be
activated.
™
The selected source will be played.
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
TIMER
– If the source selected is TUNER, the last
tuned frequency will be switched on.
– If the source selected is VCD, playback
will begin with the first track of the disc
tray 1 or other trays if disc tray 1 is
empty. If all the disc trays are empty, the
TUNER will be selected instead.
– The timer will not activate if a recording
is in progress.
To switch off the TIMER
1
Press and hold
CLOCK•TIMER
for more
than
2 seconds
.
2
Press
Ç
on the system to cancel the
timer.
™
The timer is now switched off.
™
The display will show "
CANCEL
"
and the
TIMER
flag disappears.
To start the TIMER again
(for the same
preset time and source)
1
Press and hold
CLOCK•TIMER
for more
than
2 seconds
.
2
Press
CLOCK•TIMER
again to store the
start time.
™
The timer is now on.
™
The
TIMER
flag appears on the
display.
Untitled-1
31/05/2001, 11:35 AM
23
