3-2
3-2
PCS 103 739
Dismantling of Assemblies on the Front Panel
1) Remove the Volume knobs (pos 146) as per step 1 of
Dismantling of the Cover Control on the Front
.
2) Remove 3 screws C to loosen the Headphone board (1x)
and the Karaoke borad (2x).
Note: Karaoke board is for some version only.
3) Remove 12 screws D as indicated to loosen the Front
board.
4) Remove 6 screws E to loosen the ETF7 Module.
Dismantling of Rear Portion
1)
Remove 2 screws F, 2 screws G and uncatch C2 to
loosen the Tuner board assembly.
2a) Remove 3 screw N to loosen the complete MPEG Board
assembly to reach the Mains socket board, Mains trans-
former and Combi board.
2b) Remove 3 screws M to loosen the MPEG board and
shield case together.
3)
Remove 4 screws L to loosen the MPEG board from the
shield case.
Note: Do no bend beyond 45
o
otherwise the shield case
hinge may be damaged.
4)
Remove 1 screw H & uncatch C1 to loosen the Mains
socket board.
5)
Remove 3 screws J to loosen the Combi board (Main
part).
6)
Remove 2 screws K to loosen the Mains Transformer.
